fbpx

312-761-9396 | Se Habla Espanol

813261377

2018 Haas VF-2SS APC Brand New Midaco A30SD

$104,500.00

This product is no longer available. For additional information, please fill out the form below.

TRAVELS
X Axis 30.0 in
Y Axis 16.0 in
Z Axis 20.0 inm
Spindle Nose to Table (~ max) 24.0 in
Spindle Nose to Table (~ min) 4.0 in
SPINDLE
Max Rating 30.0 hp
Max Speed 12000 rpm
Max Torque 90 ft-lbf @ 2000 rpm
Drive System Inline Direct-Drive
Taper CT 40
Bearing Lubrication Air / Oil Injection
Cooling Liquid Cooled
TABLE
Length 36.0 in
Width 14.0 in
T-Slot Width 0.630 in
T-Slot Center Distance 4.92 in
Number of Std T-Slots 3
Max Weight on Table (evenly distributed) 1500 lb
FEEDRATES
Max Cutting 833 ipm
Rapids on X 1400 ipm
Rapids on Y 1400 ipm
Rapids on Z 1400 ipm
AXIS MOTORS
Max Thrust X 1995 lbf
Max Thrust Y 1995 lbf
Max Thrust Z 3085 lbf
TOOL CHANGER
Type SMTC
Capacity 30+1
Max Tool Diameter (full) 2.5 in
Max Tool Diameter (adjacent empty) 5.0 in
Max Tool Length (from gage line) 11 in
Max Tool Weight 12 lb
Tool-to-Tool (avg) 2.8 s
Chip-to-Chip (avg) 3.6
GENERAL
Coolant Capacity 55 gal
AIR REQUIREMENTS
Air Required 4 scfm @ 100 psi
Inline Air Hose 3/8 in
Coupler (Air) 3/8 in
Air Pressure Min 80 psi
ELECTRICAL SPECIFICATION
Input AC Voltage (3 Phase) – Low 220 VAC 220 VAC
Full Load Amps (3 Phase) – Low 70 A 70 A
Input AC Voltage (3 Phase) – High 440 VAC 440 VAC
Full Load Amps (3 Phase) – High 35 A

Equipped With

Midaco Series A30SD Pallet Changer
Provision to accept pallet changer
High Speed Machining
Thru Spindle Coolant
Wireless Intuitive Probing System
High Pressure Coolant
Less than 40 cutting hours