Toyoda GL4Ai-50 Cylindrical Grinder, 2019 – Fully Enclosed, Touch Probe, Mist Collector

Machine Capacity
-Swing: 12.6″
– Distance between centers: 19.6″
– Maximum grinding diameter: 11.8″
– Maximum load between centers: 330 lbs.
– Centerline height from floor: 42.5″
– Net weight: 8,800 lbs.
Wheelhead
-Angled Head Machine
– Wheel size (OD xID): 18″ x 5″
– Wheel use range: 18″ to 12.8″
– Maximum wheel width: 3.0″
– Wheel surface speed: 6,500 SFPM
– Spindle: TOYODA STAT bearing
– Minimum move increament (on diameter): 0.000010″
– Wheelhead rapid feed (on diameter): 394 IPM
– Slide: V and Flat
– Wheelhead slide configuration: 90 degree slide, wheel fixed at 30 degrees.
Table
– Type: Two (2) piece swiveling/transversing
– Table swivel (CCW to CW): 12.5 degrees to 0 degrees
– Table stroke: 30.7″
– Slide: V and flat slide
– Minimum move increment: 0.000010″
– Table rapid feed: 394 IPM
Workhead
– Type: Dead spindle
– Workhead center taper: MT #4
– Work speed (variable): 21to 500 rpm
Footstock
– Type: manual
– Footstock center: MT #4
– Maximum center retraction: .98″
Dresser
– Type: stationary diamond holder

Equipped with:
GL4Ai-50 Cylindrical Grinding Machine with Toyoda Controller
-Live/Dead Spindle Workhead with Swiveling Base
• A2-5 U.S. standard spindle nose
Manual Footstock w/ Manual Fine Taper Adjustment (Incl credit for std)
• .98″ (25 mm) retract stroke
• ± .0018″ (0.045 mm) taper adjustment amount
Machine Full Enclosure
• Manual front sliding doors (without interlocks)
• Wheel access door (without interlocks)
•Mist Collection Unit
-Formed Diamond Dressing Tool – Chisel Point (2ct)
-75 gallon CNK Magnetic Separator Coolant System
-45 M/S Wheel Spindle Upgrade
-Additional wheel and hubs