fbpx

312-761-9396 | Se Habla Espanol

 

MJS
6871718995

Victor Taichung Vturn-A26/85 CNC Lathe, 2012 – Never Used, Still In Crate

$74,900.00

This product is no longer available. For additional information, please fill out the form below.

Capacity
Swing over bed: 35.43in
Between centers: 35.8in
Max. turning dia.: 16.5in
Std. Turning dia.: 13.4in
Bar capacity: 2.95in

Travels
X axis stroke: 8.27+1.97in
Z axis stroke: 33.4in

Spindle
Max. spindle speed: 3,500 RPM
Spindle nose: A2-8
Spindle bore: 3.38in
Inner bearing: 5.12in

Turret
No. of tools: 12
Tool shank size: 1in
Max. boring bar dia.: 2.0in
Exchange time: 0.3 sec
Exchange time (sec) (including disk up
& down): 1.05 (Adjacent), 1.44 (Opposite)

Tailstock
Quill diameter: 4.33in
Quill taper: MT#5
Quill stroke: 3.94in
Feedrate
Rapid traverse rate (ipm): X: 945 Z: 945
Cutting feed-rate (ipm): X/Z=0~50

Motor
Spindle motor (Hp): (aB200Mi-15/22) 20 / 30
Servo motor (Hp): X: 5.4 Z: 5.4

Power Requirement
Standard machine: AC 220V, 3 ph, 50 KVA
Coolant Tank capacity (gal): 95

Machine
L×W×H: 190in×83in×77in
Net weight: 16,720lbs

Equipped with:
Fanuc Oi-TD Control
Fully Programmable Tailstock
Chip Conveyor
Air conditioner for electrical cabinet
Spindle Oil Cooler
Coolant Flush on Z-axis Cover
Complete Coolant System
10″ Kitagawa 3-Jaw Thru-Hole Hydraulic Chuck & 1 Set Soft Jaws
Hand-wheel (remote MPG)
Tool Holders
3-step Warning Light
Splash Guard
Machine Lighting
Toolbox And Tools
Machine And Fanuc Instruction Manuals
Leveling Block
Leveling Plates
Plug For Chuck Bore
Taper Slice 5 each
Mounting block 5 each
Face and O.D. cutting Toolholder 2 each
Face and I.D. cutting Toolholder 1 each
Clamp block 3 each
Boring Bar Holder 2” dia. 1 each
Boring Bar Holder 1½” dia. 3 each
'U' Drill holder 1¼” dia. 1 each
Boring Bar Sleeve 1½” dia. 2 each
Boring Bar Sleeve 1” dia. 2 each
Boring Bar Sleeve ¾” dia. 2 each
Boring Bar Sleeve 5/8” dia. 2 each
Boring Bar Sleeve ½” dia. 2 each
Boring Bar Sleeve 3/8” dia. 2 each
U-Drill socket 1” 1 each
Drill socket M.T.3 1 each
End cap for ‘U’; drill holder 1 each
Coolant block 5 each