fbpx

312-761-9396 | Se Habla Espanol

 

BF
2873320514

8’8″ x 10′ 8″ Kinetic K4000xmc CNC Plasma, 2018- Hypertherm HPR 300, 300 Amperage

$299,500.00

This product is no longer available. For additional information, please fill out the form below.

8’8″ X 10’ 8” PLATE PROCESSING SYSTEM WITH KINETIC PC BASED CNC CONTROLLER, HYPERTHERM XPR300 HI DEFINITION BEVEL CUTTING PLASMA CUTTING SYSTEM, OXY-FUEL CUTTING SYSTEM, 20 HP 40 TAPER SPINDLE, 24 STATION AUTOMATIC TOOL MAGAZINE, LASER POINTER, THRU SPINDLE COOLING, HEAVY DUTY SELF-CLEANING DOWNDRAFT TABLE, CHIP EXTRACTION, DUST COLLECTOR, PNEUMATIC & INKJET MARKING SYSTEM.

GENERAL SPECIFICATIONS
• Cutting Width x Length: 8’8″ x 10’8″
**Length has the option to be extended!**
• Max. Rapids: 800 IN/MIN

PLASMA HEAD SPECIFICATIONS
• Number of Plasma Torches: 1
• Power Source Make: Hypertherm
• Power Source Model: HPR 300
• Power Source Amperage: 300
• Cutting Capacity: Up to 3” (2” PRODUCTION RATED)
• Contour/Bevel Cutting: Automated Contour Bevel
**The Kinetic Contour Bevel Head is designed to enable plasma and flame bevel cutting with the same bevel unit. Quick mount systems allow for quick cutting head changing between plasma and flame torches. This bevel is capable of piercing vertically, beveling to the programmed angle, and beveling around the contour.

DRILLING SPINDLE SPECIFICATIONS
• 20 Horsepower 
• Max Spindle RPM: 4000 RPM (DRILLING TO 2”,  TAPPING TO 1”)
• Taper: BT40
• Drive:  AC SERVO VERTICAL DRIVE COUPLED TO A BALL-SCREW
• Drive Type: High Z-Axis Travel (also allows for fabrications to be drilled)
• Machining Clamp: Clamp Foot
• # of Tools: 24 Position Tool Magazine
• Tool Changer Type: Rotary Side Mount Style
• Tool Length Measurement: Automatic Tool Length Sensing
•Tool Changes: Both Automatic and Manual Tool Changing Spindle Coolant – Includes optional High Pressure Thru Spengle Coolant to 500PSI.
*NOTE* This option is essential for DEEP HOLE DRILLING (3 x Diameter Deep) here the Coolant pushes Drill Chips and also for hard Plate drilling. Additionally, in general operation this option has significant tool life improvements over Mist Cooling.

OXY FUEL CUTTING HEAD SPECIFICATIONS:
• Cutting Capacity: 8″ Max Mild Steel
–Gas Regulation Panel Included!
–Servo Oxy Pressure Cutting Included!
The Height Control has a programmable Vertical Control via Re-Calculating Ballscrew
–Pneumatic Breakaway Torch Protection and Easy Relocation
• Full Axis Covers for Guide-Way and Ballscrew protection
• For Supply: Gas and hoses and electrical supply in Z an Y Axis Drag Chain
• Automatic Ignition

CNC CONTROLLER SPECIFICATIONS
THE KINETIC PROFILING MACHINES USE A PC BASED CONTROLLER COMBINED WITH A GLASS-FACED LCD TOUCH-SCREEN FOR THE OPERATOR INTERFACE.
• PC Based Controller
• 19” LCD Glass Faced Touch Screen
• Separate 32-Bit Motion Controller for uninterrupted motion control
• All Components are Standard
• No Program-limit size
• Emergency stop/pull wire on back of machine
• Comprehensive on board diagnostics
• Context sensitive help
• Air Conditioning of cabinet to prolong electronic life (included option).

THIS SYSTEM INCLUDES THE OPTIONAL KINETIC “FULL MACHINE PROTECTION UPGRADE”  
THIS OPTION IS FOR UPGRADING THE MACHINE TO PROVIDE IMPROVED MACHINE PROTECTION AND TO MINIMIZE MACHINE WEAR AND IMPROVE RELIABILITY. INCLUDED WITH THIS UPGRADE IS THE FOLLOWING:

• Category 3 EStop Circuit and EStop Wire Lanyard around Gantry
•Electrical Isolation Transformer for Machine Supplu and Power Conditioning
• Four head Lifter Carriage to enable future upgrading of tooling
• Bellows on the gantry to protect the drive system and linear bearings from debris, greatly improving the life of these guides and drives
•Long Axis cover belts, side protection of Long Axis, Belt rollers and Tensioners

TABLE SPECIFICATIONS
HEAVY DUTY DOWNDRAFT CUTTING TABLE W/AUTOMATIC CLEANING SYSTEM
• Capacity: 8″ Thick Plates Max
• Automated Floor Sweeper for Scrap Removal
MARKING SYSTEMS: 
PNEUMATIC/PERCUSSION MARKING SYSTEM
DESCRIPTION: THIS CNC MICRO PERCUSSION MARKING SYSTEM HAS A SUB AXIS THAT PROVIDES FOR A MARKING AREA OF 100 X 100 MM. THIS MARKING SYSTEM HAS THE FOLLOWING SPECIFICATIONS:
• MARKING AREA (X/Y): 100 X 100 MM
• AVAILABLE HEIGHTS OF CHARACTERS: 2,0 UP TO 99,9 MM