fbpx

312-761-9396 | Se Habla Espanol

 

TT
2313959469

Kitamura HX250iF HMC, 2007 – Full 4th Axis Table, Fanuc 18i MB

$44,990.00

This product is no longer available. For additional information, please fill out the form below.

Table
Table Work area (width x length) 254 x 254 mm ( 10 x 10 inch)
Table Indexing B-Axis 0.001◦
Max. Work Size Ø 350 x 400 mm
(13.78 x 15.75 inch)
Load Capacity 100Kg (220 pounds)

Travel
X Axis 305 mm (12.0 inch)
Y Axis 305 mm (12.0 inch)
Z Axis 330 mm (13.0 inch)
B Axis 360◦
Distance from Table surface to spindle center 60 ~ 365 mm (2.4 ~ 14.4 inch)
Distance from Table center to spindle nose 60 ~ 390 mm (2.4 ~ 15.4 inch)

Spindle
Spindle Taper NST NO.30
Spindle Speed 150 – 15,000 min -1

Feed
Rapid Feed X,Y And Z Axis (Auto) 48,000 mm/min. (1889.8 inch/min.)
(Manual) 15,000 mm/min. (590.6 inch/min.)
Cutting Feed X, Y And Z Axis 0-15,000 mm/min. (0-590.6 inch/min.)

Auto Tool Changer (ATC)
Tool Storage Capacity 40 Tools
Tool Selection Method Random, Tool Identified at Magazine
Tool Shank MAS BT30
Max. Tool Size Ø 50 x 200 mm (Ø2 x 7.9 inch)
-Two neighboring tool pots should be empty: Ø 75 x 200 mm (Ø3 x 7.9 inch)
Max. Tool Weight (with tool holder) 2Kg (4.4 pounds)
Tool Change Time 1.2 Second

Motor
Spindle Motor (12 min. Ratio) AC 7.5 KW (AC 10 HP)
(Continuous Operation) AC 5.5 KW (AC 7.4 HP)
Coolant Motor AC 0.73 KW (1.0 HP) (50 Hz)/1.21 KW (1.6 HP) (60 Hz)
ATC Motor AC 0.4 KW (AC 0.54 HP)

Lubrication Motor AC 5 W (AC 1/150 HP)

OPTIONS:
Coolant Through Spindle
Chip Conveyor
Full 4th Axis Table

Machine Weight with NC 4,600 Kg (10,120 pounds)
Electric Power Source
Main Circuit Three Phase current AC 200/220 V