12″ x 12″ Omax Protomax Waterjet, 2021

**Only 7 Hours**

Cutting Area 12″ x 12″ (304 mm x 304 mm)
Max Material Thickness 1.00″ (25 mm)
ACCURACY/SPEEDclick to view
Linear Positional Accuracy ±0.005″ (±0.127 mm)
Repeatability ±0.003″ (±0.076 mm)
Traverse Speed 100 in/min (2,540 mm/min)
PUMPclick to view
Pump Type 5 HP (3.7 kW), Direct Drive
Cutting Pressure 30,000 psi (2,068 bar)
High Pressure Water Flow Rate 0.2 mm (0.95 lpm)
COMPONENT DIMENSIONclick to view
Orifice Internal Diameter 0.008″ (0.25 gpm)
Mixing Tube 2.25″ (57.15 mm) long; 0.030″ (±0.076 mm) internal diameter
UTILITY REQUIREMENTS (WATER & ELECTRICAL) -click to view
Electrical 230-240 VAC, single phase, 30A, 50/60 Hz
Environment 50 to 90 °F (10-32 °C) ambient temperature with 95% or less humidity
Location and Foundation Intended for use indoors; must be placed on a hard, level, solid, non-porous, flame resistant surface. A concrete floor is recommended.
WATER SUPPLYclick to view
Minimum Input Water Pressure 45-85 PSI
Minimum Flow Rate 0.75 GPM
Temperature Required 45-80 °F
ABRASIVEclick to view
Flow rate 0.25 lbs. per minute
Recommended size 80 mesh
Hopper Capacity 14 lbs.

Spare Parts Kit (Tank slats, mixing tubes, nozzle filters and jewel orifice)
Drain water filter tank (this requires separate 120 power source)
Water spray kit (spray nozzle and hose)
Garn80-M2-MIX-PAIL Garnet Grid 80 55lbs Pail