2017, Glebar GT-610G Centerless Grinder System
$261,500.00
This product is no longer available. For additional information, please fill out the form below.
Glebar GT-610G Centerless Grinder System- New 2017
Automated Centerless Grinder with Infeed/ Thrufeed Grinding System
Work Wheel
Wheel Size: 10” x 8.625” (254 mm x 219 mm)
Spindle Speed: 2,400 RPM
Spindle Power: 15 HP (11 kW)
Regulating Wheel
Wheel Diameter: 6” (152 mm)
Wheel Speed: 10 – 400 RPM
Power: 2 HP (1.5 kW)
Grinding Diameter: 0.002” – 1.5” (0.05 mm – 38.1 mm)
Roundness: better than 0.00005” (1.27 microns)
Diameter Accuracy: better than 0.0001” (2.5 microns)
Upper Slide Resolution: 0.1 μm (0.000004”)
Lower Slide Resolution: 0.1 μm (0.000004”)
Electrics: 460 V, 3 Ph, 60 Hz
Main Motor: 15 HP
Coolant Motor: 1.5 HP
Grinder w/ Enclosure Dimensions: 63” x 53” x 70” (l x w x h)
Grinder w/ Enclosure Weight: 3,130 LB
Grinder Features
Granite Bed on Weldment Frame
Full Safety Enclosure w/ Exit Chute for Mist Collector
Rapid Work Wheel Changeover Design
Super Precision Work Wheel Spindle & Cartridge Tailstock Bearing
Motorized Ram with 0.1 micron Closed Loop Linear Glass Scale Feedback
Motorized Lower Slide (Ball Screw Controlled) with Linear Glass Scale
Servo Driven Regulating Wheel
6” Touch Screen Computer w/ Networking & Gaging Interface
Simple Set Ups for Through Feed & Infeed Operations
Wheel Dressing
Automatic Template Tracing Work Wheel Dresser
Automatically Advancing Diamond Tool
Motor Driven Template Tracing Regulating Wheel Dresser
Motorized Quill Adjustment
Work Rest Blade: 0.5” – 1.0” diameter (12.7 mm – 25.4 mm)
Losma Coolant System w/ Magnetic Separator & Mist Collector
Gravity/Paper Bed Filter System- 25 micron Filter Fabric
Clean & Slurry Tanks
Rotating Disc Magnetic Separator
Mist Collector Mounted on Machine Enclosure
Automatic Bar Feeding System
Quick-change Hand Wheel Adjustment
Simple Adjustments for Diameter Changes
Hardened Steel Tracks, Guides, Cams & Lifters
Automatic, Air-operated Escapement Device
Drip Pan
2x Outboard Work Support Brackets- 24” long V Track
New 2017- Machine has ground approximately 1,000 diff pins during the runoff at manufacturer. Machine was delivered 2018, but not put into use due to cancelled job; still on pallets. Grinder built for 1” diameter diff pins at 8 seconds per part.