312-761-9396 | Se Habla Espanol



2018 Haas VF-4 VMC WIPS, Tons of Tooling and Vices, 100 hours


This product is no longer available. For additional information, please fill out the form below.

X Axis: 50″
Y Axis: 20″
Z Axis: 25″
Spindle Nose to Table: (~ max) 29.2″
Spindle Nose to Table: (~ min) 4.2″
Max Spindle Speed: 8100 rpm
Spindle Taper: Cat 40
Table: 52″ x 18″
T-Slot Width: 0.630″
T-Slot Center Distance: 3.15″
Number of T-Slots: 5
Max Weight on Table: (evenly distributed) 1750 lb
Tool Capacity: 20
Max Tool Diameter: (full) 2.5″
Max Tool Diameter: (adjacent empty) 5.0:
Max Tool Length: (from gage line) 13:
Max Tool Weight: 12 lb
Tool-to-Tool: (avg) 2.8 s
Chip-to-Chip: (avg) 3.6 s
Coolant Capacity: 55 gal
Spindle Power: 30 HP

Equipped With:
Around 100 hours
Approx 28 cat 40 tool holders
Collet set and various tools shown
(4) Kurt Vices
Renishaw Wireless Intuitive Probing
Chip Auger
55 gallon coolant tank with 3/4 hp pump
8100 RPM spindle
30 hp vector drive in line direct drive
Early power failure detection module
Ethernet interface
Haas connect
Haas window blast airgun
Rigid tapping
20-station automatic tool changer
Visual programming system
Spindle orientation
Coordinate rotation and scaling
User Definable Macros

Available at Additional Cost: Camworks Software