SR
9114186883

Asmag RRM-Pro 220/10, Variable Speed, – 10 Roll Tube Straightener and Handler

$15,403.81

This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:

Strength – 850 N/mm2
60 Hz, 480 V
Minimum pressure – 87 psi; Max pressure – 150 psi
PLC – Siemens S7
Control Desk – Rittal
Distance between switch cabinet & machine 65 ft 6 inches
Material Supply – 50 feet long
121 feet long x 8.5 feet high
Material- steel
Material shape- round tubes
Condition primary material- blank, dry, or oiled
Outside diameter: max. 8,625โ€ (219 mm) / min. 1.9โ€ (48 mm)
Wall thickness: max. ยฝโ€ (12.7 mm) / min. 0.126โ€ (3.2 mm)
Length: max. 50โ€™ (15.24 m) / min. 17โ€™ (5.18 m)
Total tube weight: max. 1.433 lb. (650 kg)
Material straightness after straightening: up to 0.2 mm/m
The final straightness depends on the tube conditions of the pre material
Straightening rolls:
Number of straightening rolls- 10 pc. (5 pc. Top rolls and 5 pc. Bottom rolls)
Design of the rolls:
Two-piece straightening roll (shaft and) roll
The roll is hardened and polished
Straightening speed (infinitely variable)- 20-120m/min.
Single roller drives (= 10 pc. Driving motors)
Driving motors- AC-servo motors (water cooled)
Nominal power of each drive motor- approx. 50kw
Adjustable range of the roll-angle- approx. 30-40*
Drive of the angle adjustment:
5 pc. Top rolls โ€“ hydraulic cylinder with numerical controlled positioning
5 pc. Bottom rolls- hydraulic cylinder with numerical controlled positioning
Height adjustment of the rolls:
5 pc. Top rolls- hydraulic cylinder with numerical controlled positioning
5 pc. Bottom rolls- hydraulic cylinder with numerical controlled positioning
Inlet and outlet guiding:
Automatic height adjustment
10 pc. Straightening rolls
1 set inlet and outlet guiding (for one dimensional range)
Material lubrication
For the material lubrication in the straightening machine
Design: standard steel
Safety equipment
Solid safety door at the front side of the machine
Sliding door at the back side of machine
Hydraulics
Hydraulic unit
Valves
Electrics
On the plant: motors, gear motors, limit switches, sensors, junction boxes
Switch cabinet (air conditioned): circuit breakers, safety switches, projection switches for motors, contactors, PLC, modem
Control desk with touch screen
Machine software
AMAVIS visualization system and database:
User optimized machine visualization
All machine settings can be saved (product-related) in the AMAVIS
Database and can be recalled and easy readjusted and then saved again
Handling system to the straightening machine
Scope of supply
Inlet trough
Vario- inlet trough
With pinch roll unit
Outlet trough
With pinch roll unit
Pneumatic
Hydraulic
Electric