Haas VF-2SS VMC, 2018 – Tooling, WIPS, 12K RPM, Hi Spd Machining, Auger, Low Hours
$72,900.00
This product is no longer available. For additional information, please fill out the form below.
Travels:
X Axis: 30.0 in
Y Axis: 16.0 in
Z Axis: 20.0 inm
Spindle Nose to Table (~ max): 24.0 in
Spindle Nose to Table (~ min): 4.0 in
Spindle:
Max Rating: 30.0 hp
Max Speed: 12000 rpm
Max Torque: 90 ft-lbf @ 2000 rpm
Drive System Inline Direct-Drive
Taper CT 40
Bearing Lubrication Air / Oil Injection
Cooling Liquid Cooled
Table:
Length: 36.0 in
Width: 14.0 in
T-Slot Width: 0.630 in
T-Slot Center Distance: 4.92 in
Number of Std T-Slots: 3
Max Weight on Table (evenly distributed): 1500 lb
Feedrates:
Max Cutting: 833 ipm
Rapids on X: 1400 ipm
Rapids on Y: 1400 ipm
Rapids on Z: 1400 ipm
Axis Motors:
Max Thrust X: 1995 lbf
Max Thrust Y: 1995 lbf
Max Thrust Z: 3085 lbf
Tool Changer:
Type: SMTC
Capacity: 30+1
Max Tool Diameter: (full) 2.5 in
Max Tool Diameter (adjacent empty): 5.0 in
Max Tool Length (from gage line): 11 in
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6
General:
Coolant Capacity: 55 gal
Air Requirements:
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8 in
Coupler (Air): 3/8 in
Air Pressure Min: 80 psi
Electrical Specifications:
Input AC Voltage (3 Phase): Low 220 VAC 220 VAC
Full Load Amps (3 Phase): Low 70 A 70 A
Input AC Voltage (3 Phase): High 440 VAC 440 VAC
Full Load Amps (3 Phase): High 35 A
Equipped With
12k RPM Spindle
Wireless Intuitive Probing System (WIPS)
Visual Part Programming System
User-Definable Macros
Automatic Air Gun
High-Speed Machining
Chip Auger
EVERYTHING PICTURED related to VF2SS including but not limited to:
All tooling and tool holders seen in pictures
Carts and tool boxes seen in pictures
Orange vice
Torque wrenches
Soft jaws
Dual station vice
Shrink fit machine
Available Immediately