Inline Filling System, 2020

Includes:
45 Inch Diameter Stainless Steel Unscramble Table:
All Stainless-Steel Tubular open-frame construction.
Standard speed setting is 0 to 7 rpm or 82.5 feet/min.
Variable speed, sealed, fused/surge protected DC motor w/ 550 inch/lbs torque.
Turntable glides on rubber, self-lubricating bearings for quiet operation.
The turntable height is 35 inches, adjustable to 40 inches.
Foot pads are fully articulating and vibration-resistant.
Unique floating bearing removes downward thrust on drive armature to ensure long life.
AB PLC and Color Touch Screen w/ Digital Speed Controls
Overflow Filler:
Constructed of heavy-duty stainless steel 2″ square tubing for extreme strength and rigidity.
Completely washdown capable
Automatic drip tray to protect bottles from nozzle product dripping
Automatic conveyor-mounted bottle indexing gates to control container movement.
No tools required, nozzle mounts, and bottle indexing gates.
Precision handwheel height adjustment.
Intelligent Automation Features:
No bottle/No Fill (suspend operation)
Downstream Backup/No Fill (suspend operation)
Dimensions: 8′ L x 42″ D x 6’6″ H
Utility requirements: Electric: Depends on pump selection; see pump specifications. Air: 7 cfm @ 80 psi
VIDEOJET 1220 INK JET CODER:
Password protected programming
IP55 Stainless Steel (washdown capable) cabinet
WYSIWYG message creation, QWERTY keypad
Automatic printhead flushing during start-up and shut down
Airless operation, internal pump eliminates the need for factory air
Caster-equipped mobile printhead stand
Product Detector
Power Conditioner
Fluid supplies starter pack
OVERFLOW TANK 316SS (LARGE SANITARY DUTY) W/ LEVEL CONTROL:
Large Capacity 60 Gallon tank with float baffle provides automatic supply to the filler from the bulk supply tank and acts as an overflow vessel for product return from filling nozzles.
Features:
316 Stainless Steel construction with cover
All stainless “2B” finish frame
Manual 1.5″ discharge stainless ball valve for drainage
Integrated float switch and controls for shut-off valve and supplied bulk product pump
Control system outputs for both air signal and 24-volt signal for air diaphragm bulk
Supply pump or electric supply pump
Designed for 60″ FOF Base Machines and larger.
HIGH SPEED DOUBLE BELT BOTTLE SPACER
Conveyor mounted unit controls spacing of round, square, or heavy containers on continuously running conveyors upstream of labelers, cappers and neck banders. The unit consists of 2 opposing belts running parallel to the conveyor. The unit is also capable of acting as a transport for bottom coding applications.
Features:
-16″ long belt length
-Variable speed from 0-125 ft/min variable speed
-Two direct drive 90 vdc motors
-Sturdy 1.5IN tubular frame mounts directly to the conveyor
Utility requirements:
-Electric: 120 VAC / 5 Amps
COMPUTORQUE NT CAPPING MACHINE (RIGHT HAND)
A fully automatic inline capping machine applies and torques caps onto containers as they pass through on a moving conveyor. Capping speed: up to 200 cpm depending on cap size and container configuration. See the Scope of Project for actual speeds. Cap size range: up to 70 mm including child resistant caps. Container size range: (height) 1-1/2″ to 15″ (width) 1/2″ to 7″ in plastic, metal, or glass. Dependent on conveyor height
Features:
-Control panel visually displays operating parameters and messages in 40 characters
-For concise operator feedback,
-Mounts over existing conveyor system and includes casters and leveling pads.
-Power bottle height adjustment,
-Direct drive cap torque control for accurate torque and reduction of scuffed caps,
-Stainless Steel frame & panels for cleanliness and durability.
-Cap on-demand sensor initiates cap feeding as needed.
BULK CAP ELEVATOR SORTER (5.0 RH)
Fully automatic unit with 5 cubic foot floor mounted cap bin sorts caps as they are elevated. Gravity forces incorrectly oriented caps to fall back into the bin for resorting. System is for higher speed sorting of flat caps where the diameter is greater than the height.
SIGMA I NEO // seal at the rate 32 feet/min.
Compact all-in-one design
Safety / Protection Alarm
Inbuilt Microprocessor Control
Universal Sealing Head/Customized Sealing Head, Seals from Cap size 20 to 120 mm
Safe Reliable Compact
User Friendly
Movable
Sealing Head Moving Standard-350 mm
Air-cooled
UNIVERSAL R321 AUTOMATIC WRAP LABELER
Automatic unit labels round containers
-Model SL1500 stepper drive label applicators (max label speeds 1500 inches per minute)
-Encoder with speed following from wrap station to SL1500,
-Heavy duty system framework,
-6″ wide x 8′ long Delrin chain conveyor,
-Product metering wheel,
-Photoelectric product sensor,
-6 3/8″ wide web capacity,
-2″ wide or 4″ wide x 15″ long wrapping station (for labels up to 10″ long)
-NEMA 12 control enclosure.
-Label roll specification: die cut labels with 1/8″ spacing on a 12″ outer diameter roll (max) with a 3″ inner core.
45 IN DIAMETER S/S ACCUMULATION TURNTABLE
SD-662 SEMI-AUTOMATIC CASE TAPER
For applications where previously erected cases are loaded and flaps are manually closed.
Plug-in Operation
Dual Masts with twin lead screws for stability
Precise Top and Bottom sealing
Side Mounted Compression Rollers for tight seals
Heavy Duty Side-Belt Drives ensure square cases
Adjustable Leg Supports
Easy case-size change-over two crank handles
Piranha Tape Heads for accurate and consistent sealing