Tormach PCNC 1100 Series 3 CNC VMC, 2011 – 4th Axis – Touch Probe – Duality Lathe
$17,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Table Size: 34″ x 9.5″
Table Slots: 3 Slots 5/8″
Travel: 18″ x 9.5″ x 16.25″ (X,Y,Z)
Feed Rate: 110 IPM (X,Y) 90 IPM (Z)
Spindle Nose to Table: 17″ maximum
Spindle Center to Column: 11″
Spindle Nose Diameter: 3 3/8″
Max Workpiece : 500 lbs Maximum
Power Requirements: 230-250 VAC 50/60 Hz single phase (primary). 20A breaker recommended. 115 VAC 50/60Hz (secondary).
Shipping Dimensions: 56″ x 45″ x 60″
Weight: 1130 lbs net / 1296 lbs gross (excludes stand)
Frame and Table: Cast iron frame and table, with hand scraped hydrodynamic ways and tapered adjustment gibs
Way Surfaces: Low friction PTFE-filled acetyl bonded sliding surface. Similar to Rulon® and Turcite
Spindle Taper: R8 (optional BT30 retrofit available)
Spindle Construction: Cartridge with spindle lock
Spindle Drive: Emerson Control Techniques™ Sensorless Vector Technology with Fold-back logic – 1100W continuous, 2800W peak.
Spindle Power: 1.5 hp Brushless AC 3-phase Induction Motor, Vacuum Pressure Impregnated (VPI) Windings
Spindle Speed: 100 to 5140 RPM
Transmission: V-Belt Drive, 2 ratios
Axis Drives: High Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers
Ballscrews: Ground P4 Ball Screw with anti-backlash double ball nut (Incremental Error: <.0006″/ft and Cumulative Error: <.0008″ at 35″)
Coolant/Oiler Capacity: Complete spindle control, plus7 gallons
Auto Oiler Capacity: 2.1 quarts
Manual Oiler Capacity: 0.25 quarts
Equipped with:
4th Axis Kit – 8″ table
(Manual) 8″ Motorized Table Integration Kit for 4th Axis Kit (Manual)
Integrated CNC Machine stand with coolant kit
Includes Coolant pump & Tank
Tool tray for machine arm
Jog Shuttle Controller
Duality Lathe – Combination CNC/Manual Lathe
Tooling Included:
Active Probe
5C Collet Adaptor & 15 piece set
Tap Chuck
Tormach Vise Jaw Set
MRT-3JAW – 160mm
MRT-4JAW – 160mm
58 PC Pro quality steel clamp kit
Load Meter Kit Included
Test Indicator with accessories
Photo Vcarve Software
Cut2D+Cut3D Software