Toyoda GL4Ai-50 Cylindrical Grinder, 2019 – Fully Enclosed, Touch Probe, Mist Collector
$170,000.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Machine Capacity
-Swing: 12.6″
– Distance between centers: 19.6″
– Maximum grinding diameter: 11.8″
– Maximum load between centers: 330 lbs.
– Centerline height from floor: 42.5″
– Net weight: 8,800 lbs.
Wheelhead
-Angled Head Machine
– Wheel size (OD xID): 18″ x 5″
– Wheel use range: 18″ to 12.8″
– Maximum wheel width: 3.0″
– Wheel surface speed: 6,500 SFPM
– Spindle: TOYODA STAT bearing
– Minimum move increament (on diameter): 0.000010″
– Wheelhead rapid feed (on diameter): 394 IPM
– Slide: V and Flat
– Wheelhead slide configuration: 90 degree slide, wheel fixed at 30 degrees.
Table
– Type: Two (2) piece swiveling/transversing
– Table swivel (CCW to CW): 12.5 degrees to 0 degrees
– Table stroke: 30.7″
– Slide: V and flat slide
– Minimum move increment: 0.000010″
– Table rapid feed: 394 IPM
Workhead
– Type: Dead spindle
– Workhead center taper: MT #4
– Work speed (variable): 21to 500 rpm
Footstock
– Type: manual
– Footstock center: MT #4
– Maximum center retraction: .98″
Dresser
– Type: stationary diamond holder
Equipped with:
GL4Ai-50 Cylindrical Grinding Machine with Toyoda Controller
-Live/Dead Spindle Workhead with Swiveling Base
• A2-5 U.S. standard spindle nose
Manual Footstock w/ Manual Fine Taper Adjustment (Incl credit for std)
• .98″ (25 mm) retract stroke
• ± .0018″ (0.045 mm) taper adjustment amount
Machine Full Enclosure
• Manual front sliding doors (without interlocks)
• Wheel access door (without interlocks)
•Mist Collection Unit
-Formed Diamond Dressing Tool – Chisel Point (2ct)
-75 gallon CNK Magnetic Separator Coolant System
-45 M/S Wheel Spindle Upgrade
-Additional wheel and hubs