Viking 36T Airless Table Shot Blast, 2020 – Abrasive Trap & Hopper, Dust Collector, Spark Arrestor

Table Type: Manganese Rotating Table
Table Weight Capacity: 2,000 lbs.
Work Envelope: 36″ Diameter X 34″ High
Sccr: 65 Ka
Fla: 28.2 A
Main Unit Dimensions: 84″L X 48″W X 144″H
Can be Wired for 220v 3ph @ 52a
Currently Wired for 460v 3ph @ 26a

Equipped With:
Abrasive Trap
(For Removing Entrained Abrasive From the Dust Collector Air Stream. Trap is Affixed Inline on the Back of the Blaster and Returns Abrasive to the Machine)

Auxiliary Abrasive Hopper
(500 Pound Capacity Hopper Bolts to Rear of Machine and Uses an Air Actuated
Abrasive Valve to Maintain Abrasive Level in the Cabinet. Sensor in the Air-Wash Hopper Tells the
Abrasive Valve When to Add Abrasive.)

Vk800 Dustmax Dust Collector
(1.5 Hp Continuous Duty Cartridge Type Dust Collector. This Dust Collector has a 30 Second Programmable Timer Board to Pulse the Cartridges with a Jet Of Compressed Air
Between Blast Cycles to Purge the Filters. Filter Cartridges are 99.999% Efficient Down to
0.8 Micron Particle Size. The Dust
Collector Comes with Extended Legs to Accommodate a 55 Gallon Debris Drum Underneath. Dust Collector is 99.999% Efficient on Particles as Small as 1 Micron. Fusible Link Sprinkler System Standard.)

Titanium & Magnesium Cannot be Blasted with this Dust Collector.

Spark Arrestor
(Installed Inline with Duct Work.)