Call Now: 1-816-301-7226 | Se Habla Espanol: 1-773-466-8276

2018 Doosan Puma 2600SY - Sub Spindle, Y Axis, Super Low Hours, Hardly Used!

This machine is no longer available, please contact us to find a similar machine. 

Specifications:

CAPACITY:
Swing over bed (swing over front door)780 mm (680 mm) (30.7" (26.8"))

Swing over carriage 630 mm (24.8")
Maximum turning diameter 376 mm (14.8")
Maximum turning length 760 mm (29.9)
Distance between main and sub spindle noses 1,100 mm (43.46")

MAIN SPINDLE:
Spindle speed 4,000 rpm
Spindle nose A2-8
Draw tube ID 82 mm (3.23")
Spindle bore diameter 91 mm (3.58")
AC spindle motor (30 min. rating) 22 kW (30 hp)
Maximum spindle torque (S3 25%) 599 Nm (442 ft-lb)
Standard chuck size 254 mm (10")
Standard chuck through hole ID 82 mm (3.23")

C-AXIS MAIN SPINDLE:
Minimum programmable angle 0.001 degree
Rapid traverse rate 200 rpm
C-axis repeatability ±0.006 degree
C-axis positioning accuracy 0.0083 degree

SUB SPINDLE:
B axis travel (sub spindle) 830 mm (32.6)
Sub spindle guideway span 335 mm (13.2)
Spindle speed 6,000 rpm
Spindle nose A2-5
Draw tube ID 50 mm (1.968")
Standard chuck though hole ID 66 mm (2.59")
Spindle bore diameter 62 mm (2.44")
AC spindle motor 30 min. rating 15 kW (20 hp
Rapid traverse rate 30 m/min (1,181 ipm)
Maximum spindle torque (30 min. rating) 134 Nm (99 ft-lbs)
Standard chuck size 210 mm (8.0")

C-AXIS SUB SPINDLE:
Minimum programmable angle (degrees) 0.001 deg
Rapid traverse rate 200 rpm
C-axis repeatability ±0.006 deg
C-axis positioning accuracy 0.0083 deg

BED, SADDLE & CROSS SLIDE:
Angle of slant bed 30 degree
X axis travel 260 mm (10.2")
Z axis travel 830 mm (32.67")
X axis guide way span 321 mm (12.63)
Z axis guide way span 437 mm (17.2")
X axis rapid traverse rate 30 m/min (1,181 ipm)
Z axis rapid traverse rate 30 m/min (1,181 ipm)
X axis ball screw diameter 32 mm (1.26")
Z axis ball screw diameter 36 mm (1.42")
X axis feed thrust (continuous) 6,761 N (1,520 lb)
X axis feed thrust (intermittent) 9,465 N (2,128 lb)
Z axis feed thrust (continuous) 12,414 N (2,790 lb)
Z axis feed thrust (intermittent) 17,379 N (3,907 lb)
B axis feed thrust (continuous) 6,761 N (1,520 lb)
B axis feed thrust (intermittent) 9,465 N (2,128 lb)
X axis repeatability ±0.002 mm (±0.00008")
Z axis repeatability ±0.003 mm (±0.00012")

TURRET:
Number of tools 12
Number of index positions 24
Tool holder type BMT-65
Turning tool shank size (metric turret 25 mm) 1.0"
Boring bar diameter (metric turret 50 mm) 2.0"
Boring bar diameter, sub spindle (metric turret 25 mm) 1.0"
Turret index time (next station swivel time) 0.15 second
Tool selection Bi-directional
Curvic coupling diameter 230 mm (9.05")
Turret clamping force 59 kN (13,263 lb)
Turret index repeatability ±0.0005 degree

ROTARY TOOLS:
Rotating tool RPM 5,000 rpm
Rotating tool spindle motor (5 min. rating) 7.5 kW (10 hp)
Rotating tool torque (5 min. rating) 95.5 Nm (70 ft-lb)
Rotating tool collet type ER 32
Milling collet capacity 1/8 to 3/4"

* Max X-axis tool length with Y-axis in any position is 83mm (3.27")

Y-AXIS:
Y-axis travel (total) 105 mm (±52.5mm) (4.13 (±2.065))
Y-axis travel (above center) 52.5 mm (2.065)
Y-axis travel (below center) 52.5 mm (2.065)
Y-axis rapid traverse rate 10 m/min (394 ipm)
Y-axis repeatability ±0.003 mm (±0.00012")
Y-axis feed thrust (continuous) 8,451 N (1,900 lb)
Y-axis feed thrust (intermittent) 11,832 N (2,660 lb)

COOLANT SYSTEM:
Coolant pump pressure 4.5 bar (65 psi)
Coolant pump motor 1.1 kW (1.4 hp)
Coolant tank capacity 220 l (58 gal)

HYDRAULIC / LUBRICATION:
Hydraulic tank capacity 20 l (5.2 gal)
Hydraulic oil required* Mobil DTE #24 or Shell Tellus 32
Way lubrication tank capacity 2.0 l (0.5 gal)
Way lubrication oil required* Mobil Vactra #2 or Shell Tonna T68
Main/sub spindle oil chiller tank capacity 10 l (2.6 gal)
Main/sub spindle oil chiller oil requirement (or equivalent)ISO VG10

* Cross reference these numbers for other brands

GENERAL:
Machine weight 6,550 kg (14,440 lb)
Floor space - length x width 3,600 mm x 1,905 mm (142" x 75)
Floor space length with hinge belt chip conveyor 4,483 mm (177")
Machine Height 2,163 mm (85)
Height from floor to spindle center 1,110 mm (43.7)
Voltage required 205-235V/3 ph/60 Hz
Power requirement 55 kVA (145 Amps @ 220 Volts)

Equipped with:

Sub SpindleStandard Tooling Package Included
Guideways
Parts CatcherParts ConveyorFanuc Embedded Ether FunctionEZ Guidei
Tool Monitoring SystemAutomatic Tool SetterStructure Thermal CompensationSub Spindle Part Ejector / Coolant Flush
MUCH MORE....Ask for PDF Spec Sheet!

Request a Quote


Related Items