fbpx

312-761-9396 | Se Habla Espanol

 

MS
16853444733

12′ x 21′ Koike Aronson PlatePro ExtremeHD CNC Plasma, 2022 – XPR300-Never Installed

$219,900.00

Request a Quote to Instantly See Pricing

Call Now

Machine Type: Plasmas
Make: Koike Aronson
Model: PlatePro Extreme XHD
Year: 2022
Capacity: 12‘ x 21‘
Machine Location: Upon Request
Stock #: 444733

Hypertherm Edge Connect CNC and Yaskawa Drive Interface w/Operator Console
• Edge Connect TC – CNC Features:

Hypertherm XPR300 Automatic Gas Plasma System

XPR 300 VWI Gas Console

• Fabricated cross axis beam with large back shelf for increased rigidity.
• Precision ground Linear ways on cross axis main beam.
• Heavy Duty 56 inch dual side drive fabricated saddles with fore/aft side guide rollers.
• 6 inch diameter main saddle rollers.
• Helical low backlash gearboxes with rack and pinion Y-axis drive for precise motion.
• Fully captured X-Axis master drive carriage.
• Helical low backlash gearboxes with helical rack and pinion drive for precise motion.
• Endless loop steel band for fully captured slave carriages.
• X and Y-Axis Cable Carriers for torch hose and cable management.
• Effective cutting width: 144 inches
• Inherent parking area for three slave torch stations allows
• full cutting width for master carriage.

• Windows®10 Embedded
• Intel J1900 Quad -core MCU or equivalent
• 120GB SSD Hard Drive or better
• 4 GB DDR3 or better
• 19 inch Glass Touchscreen with 1366×768 Native resolution
• IntelliTouch Pro PCAP (Projected Capacitive touch technology)
• 2 USB 2.0 Ports
• Built in Wireless Communication

• Forward and backup on path function
• Skip to pierce or Skip part function
• Part Program Support
• Remote Help
• Supports Networking
• Auto Gas Support
• DXF Input
• Simple Shape Nesting
• Select-able Process Parameter table
• Cut Pro Wizard
• Pronest CNC version included (single part nesting)
• Sure Cut technologies applied (True hole, Rapid Part and
• Optimize consumable life, True Bevel when applicable)

• Power-Pierce Shield Technology For Extreme Piercing
• XPR300 Power Supply
• Core Automatic Gas Console (Mild Steel ONLY)
• Remote High-Frequency
• Quick Disconnect Machine Torch Assembly
• Shielded Torch Lead Set
• Work Cable
• XPR300 Consumable Parts Starter Kit, Mild
Steel

H2O Water 115 psi @9.4 gph
Ar argon 110 psi @ 250 scfh
F5 Nitrogen/Hydrogen 110 psi @ 85 scfh
Mild Steel (O2/Ar):(Argon Assist)
• 2″ Maximum Production Pierce
• 3″ Maximum Edge Start
Stainless Steel (N2/H2O):
• 1 1/2″ Maximum Production Pierce
• 3″ Maximum Edge Start

Integrated Sensor THC Torch Height Control with Laser Pointer
• Raise/lower stroke; 12 inches programmable up to 1,000 ipm.
• Initial height positioning, adjustable stroke retract between cuts and Dynamic positioning.
• Accuracy of 0.0005 inch. Mounting package, interconnecting cables and torch clamp.
• Collision Detection Mount
• Mounting package with magnetic integral breakaway clamp for collision detection and system
shutdown
• Laser Pointer
• Used to indicate position
• Mounted on master carriage

• 12’6″Wide x 21’6″Long x 4”mild steel
• Pneumatic baffle design with removable slats, slat frames and slag pans.
• Operator can raise/lower of water levels with just a switch
• Removable Slat Frames & Slats
• Removable Clean Out Pan
• No Dust Collector Needed

All specifications are assumed to be correct but must be confirmed by the purchasing entity.