fbpx

312-761-9396 | Se Habla Espanol

 

Rollformers

Used Rollformers For Sale

Please view the regularly updated inventory of used Rollforming machines below. Inventory includes a variety of brands, sizes, and capacities. Below is our up-to-date selection of used rollforming machines. Our brands include but are not limited to: Davi, B&K, Bertsch, and much more. If you don’t find the rollforming machines you are looking for, please contact us!

Revelation Machinery can always help you find what you need!  If you have any questions about rollformers or need to find a specific brand/type, please feel free to contact us!  If you need to sell your used rollformer, do so here!

  • Reset


Found Results
2018
CSC Machine
Roll Former
2016
G32 HM
G32 HM
1900
Milton
9
2017
Jobsite
PS800
2017
Roll Former
VS-150
2019
Weldlogic
3-Roll Pyramid Roller
2012
FACCIN s.r.l. (Italy)
2021
1997
Engel
M-516UC
1990
Bradbury
SR-20

Roll forming is a fabrication process where metal is passed through a pair of rolls to flatten and/or thin out the material.   It can either be hot rolling (metal is rolled at temperatures above the recrystallization temperature, which is anything done with heat) or cold rolling (metal is rolled at temperatures below recrystallization temperature, which is at room temperature or near room temperature).   The rolling machines that cold roll, do not expend any energy to heat the material. The whole process is done at room temperature and this saves energy. There are various types of rolling process including controlled rolling, roll forming, profile rolling, roll bending and ring rolling.  A basic roll forming machine has four major parts to it. The first is the entry section where the workpiece is placed. The second is the station rollers, where the material is bent by moving through them. Next, the cut off press, where the material is cut to the specified length. The last part of the machine is the exit station, where the final piece exits the process and is moved.

Roll forming machines are fed long strips of metal that are passed through consecutive sets of rolls that will bend at specific increments until the desired shape is obtained.  They usually operate at speeds between 30-600 feet per minute at a continuous cycle. This makes them an ideal choice for high volume manufacturing facilities. These machines perform bends at room temperature (cold rolling) with several stations in the machine to guide the material and make the specific bends at each point.    Each point will bend the material a certain amount and then proceed to the next until it is finished. This type of bending process allows for cross-sectional configuration. The roll forming machines create accurate and clean bends that require little finishing touches.

Most roll forming machines will have the ability to use computer programs to assist in the process.  CAD systems will be a big benefit to machine operators and ensure that the highest level of productivity is achieved.  CAD and CAM systems will minimize the waste of materials as well. There are even some roll forming machines that have TIF welding capabilities as well as some that have laser capabilities.

Revelation Machinery can always help you find what you need!  If you have any questions about Roll forming machines or need to find a specific brand/type, please feel free to contact us!  If you need to sell your used Roll forming machines, do so here.