15″ x 48″ Clausing Colchester Engine Lathe
$5,000.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Spindle Speed Control: Geared Head
Spindle (Hp): 7.5
Swing Over Bed (inch): 15.75
Swing Over Cross slide (inch): 9.7
Swing in Gap (inch): 23
Distance Between Centers (inch): 50
Bed Width (inch): 12.5
Spindle Bore (inch): 2.12
Spindle Nose (camlock): D1-6
Spindle Nose Taper: 4 MT
Number of Spindle Speeds: 16
Spindle Speed RPM Range: 25-2000
Cross Slide Travel (inch): 9.8
Width of Cross Slide (inch): 7.09
Top Slide Travel (compound) (inch): 5.1
Tailstock Quill Diameter (inch): 2.8
Tailstock Quill Travel (inch): 5.5
Tailstock Quill Taper: 5 MT
Longitudinal Feed Range (in/rev): 0.0014 – 0.096
Cross Feed Range (in/rev): 0.0007 – 0.048
Number of Inch Pitches: 56
Range of Inch Pitches: 2 – 56
Number of Metric Pitches: 51
Range of Metric Pitches: 0.2 – 14
Number of Diametral Pitches: 20
Range of Diametral Pitches: 8 – 56
Number of Module Pitches: 20
Range of Module Pitches: 0.2 – 3.5
Coolant System: No
Voltage Required: 230/460
Phase: 3
Machine Foot Print (LxWxH) (inch): 99 x 63 x 44
Machine Weight (lbs.): 3,300
Equipped With:
50” Between Center Distance
15.75” Swing Over Bed
Fully-Geared Headstock With 16 Spindle Speeds Ranging From 25 To 2000 Rpm
All Headstock Gears Are Hardened And Ground
Headstock Shafts Are Splined And Turn On Anti-Friction Bearings
Spindle Bearings, Gears, And Shafts Are Lubricated By A Forced Lubrication System
A Broad Range Of Feed And Thread Selections Are Available By Using Three Selector Levers And An 8 Position Rotary Dial
Cross Slide Runs Along A Dovetail Guide