Acer 2980G Engine Lathe, 2002 – Good Condition
$12,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
SPECIFICATIONS:
CENTER HEIGHT: 14-3/4″
SWING OVER BED: 29-1/8″
SWING OVER CROSS SLIDE: 20-1/2″
DISTANCE BETWEEN CENTERS: 80″
SPINDLE NOSE: ASA1-11 OR D1-11
SPINDLE BORE DIAMETER: 4-1/8″
TAPER OF CENTER: MT.#5
SPINDLE SPEEDS: 25~1200RPM (12 STEPS)
CROSS SLIDE TRAVEL: 18-1/4
COMPOUND REST TRAVEL: 9″
MAX SIZE CUTTING TOOL: 1″ X 1″
SPINDLE DIAMETER: 3-1/32″
SPINDLE TRAVEL: 7″
TAPER OF CENTER: MT.#5
BED LENGTH: 122″
BED WIDTH: 16-1/2″
WIDTH OF GAP: 20-1/4″
PITCH OF LEADSCREW: 1-1/2″Ø, 4 TPI
METRIC PITCH THREADS: 2~56 TPI (45 KINDS)
MODULE PITCH THREADS: 0.25~7 M.P. (23 KINDS)
DIAMETRAL PITCH THREADS: 4~112 D.P. (43 KINDS)
MAIN DRIVE MOTOR: 15 HP
COOLANT PUMP MOTOR: 1/8 HP
FLOOR DIMENSIONS: 129″X50″
NET WEIGHT: 7680 LBS.
GROSS WEIGHT: 9190 LBS
PACKING DIMENSIONS: 144.5″X50″X74″
FEATURES:
SPINDLE MOTOR: 15HP SINGLE SPEED/220V/3PHASE/60HZ
12 SPINDLE SPEEDS: 25- 1,200 RPM
HEADSTOCK WITH MAGNETIC CLUTCH & ELECTREIC BRAKE
HARDENED AND GROUND GEARS AND SPINDLE
HARDENED AND GROUND MEEHANITE CASTING BED WAY
20″ D1-11 FOUR JAW CHUCK
4-WAY TOOL POST