Haas ST-15 CNC Lathe, 2018 – Parts Catcher, 1100 Hours, Royal Quick Change Dead Length Chuck
$46,500.00
This product is no longer available. For additional information, please fill out the form below.
SWING DIAMETER
Max Part Diameter: 16.5 in
Over Wedge: 16.5 in
CAPACITIES
Chuck Size: 8.3 in
Max Cutting Diameter (varies with turret): 14.0 in
Max Cutting Length (varies with workholding): 16.0 in
Bar Capacity: 2.50 in
TRAVELS
X Axis: 7.9 in
Z Axis: 16.0 in
FEEDRATES
Rapids on X: 1200 ipm
Rapids on Z: 1200 ipm
AXIS MOTORS
Max Thrust X: 3300 lbf
Max Thrust Z: 3300 lbf
SPINDLE
Spindle Nose: A2-6
Max Rating: 20.0 hp
Max Speed: 4000 rpm
Max Torque: 150 ft-lbf @ 500 rpm
Spindle Bore ø: 3.50 in
TURRET
Number of Tools: 12-Station BOT
OD vs ID Tools: Any Combination (will vary with turret)
Boring Bar Rear Clearance (from back of turret ): 0.75 in
Coolant Capacity: 30 gal
AIR REQUIREMENTS
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8 in
Coupler (Air): 3/8 in
Air Pressure Min: 80 psi
ELECTRICAL SPECIFICATION
Spindle Speed: 4000 rpm
Drive System: Direct Speed, Belt Drive
Spindle Power: 20.0 hp
Input AC Voltage (3 Phase) – Low 220 VAC
Full Load Amps (3 Phase) – Low 40 A
Input AC Voltage (3 Phase) – High 440 VAC
Full Load Amps (3 Phase) – High 20 A
Equipped With:
Parts Catcher
Royal Quick Change Dead Length Chuck
All specifications are assumed to be correct but must be confirmed by purchasing entity