Haas TM-2P VMC, 2018 โ Full 4th Axis Rotary, Low Hours
$34,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
X Axis: 40.0โณ
Y Axis: 16.0โณ
Z Axis: 16.0โณ
Spindle Nose to Table (max): 20.0โณ
Spindle Nose to Table (min): 4.0โณ
Spindle
Max Rating: 7.5 hp
Max Speed: 6000 rpm
Max Torque: 33.0 ft-lbf @ 1200 rpm
Drive System: Direct Speed, Belt Drive
Taper: CAT 40
Bearing Lubrication: Grease Packed
Cooling: Air Cooled
Table
Length: 57.8โณ
Width: 10.5โณ
T-Slot Width: 0.626โณ to 0.630โณ
T-Slot Center Distance: 4.00โณ
Number of Std T-Slots: 3
Max Weight on Table (evenly distributed): 350 lb
Feedrates
Max Cutting: 400 ipm
Rapids on X: 400 ipm
Rapids on Y: 400 ipm
Rapids on Z: 400 ipm
Axis Motors
Max Thrust X: 2000 lbf
Max Thrust Y: 2000 lbf
Max Thrust Z: 2000 lbf
Tool Changer
Type: Carousel
Capacity: 10
Max Tool Diameter (full): 3.5โณ
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 5.7 s
Chip-to-Chip (avg): 6.5 s
Air Requirements
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8โณ
Coupler (Air): 3/8โณ
Air Pressure Min: 80 psi