Hitachi Seiki HS 400 HMC, 2000

Travel
Spindle head longitudinal X axis mm(inch): 600(24)
Spindle head vertical Y axis mm(inch): 580(23)

Table cross
Z axis mm(inch): 580(23)
Table top to spindle center mm(inch): 50-630(2-25)
Table center to spindle nose mm(inch): 150-730(6-29)
Floor level to table top mm(inch): 1150

Table
Size : 400×400 (15.75×15.75)
Max. loading capacity kg (lbs.): 400(880)
Surface configuration: M16(5/8) x25Places
Min. index angle degree: 1

Spindle
Spindle speed min (rpm): 35-12000
Spindle change ranges step: Stepless
Spindle nose: 7/24 taper No.40
Bearing inside diameter mm(inch): 75(3)

Feedrate
Rapid traverse m/min(ipm): 50(1970)
Cutting feedrate w/SHG-1 mm/imin(ipm): 1-50000 (0.04-1970)
Jog feedrate mm/min(ipm): 0-5000(0-200)

ATC
Tool shank: BT/CAT/DIN 40
Pull-stud degrees: 45
Tool storage capacity pcs: 61
Max.tool diameter (w/adjacent tools) mm(inch): 95(3.7)
Max.tool diameter (without adjacent tools) mm(inch): 160(6.3)
Max. tool length mm(inch): 300(11.8)
Max.tool weight kg (lbs.): 12(26.4)
Tool selection system: Fixed address random access (Address change available)

APC
No. Pallets: 2
Pallet change system: Rotary type

Motors
For spindle drive kW (HP): 22/18.5(30/25)
For servo (X/Y/Z) kW (HP): 4.6(6)/4.8(6.4)/4.4(6)
For hydraulic pump kW (HP): 2.2(3)
For lubrication pump kW (HP): 0.017(1/50)
For coolant pump kW (HP): 0.4(1/2)
For spindle cooler kW (HP): 0.6(3/4)
For table indexing kW (HP): 0.4(1/2)

Power sources required
Electric power kVA: 57
Power supply voltage V: 200 -220 ± 10%
Power supply frequency Hz: 50 or 60±1
Air pressure MPa(kgf/cm2): 0.5(70psi)
Air flow rate: N I (gal/min) 500(132)

Tank capacity
Hydraulic unit tank I (gal): 20(5.2)
Lubrication oil tank I (gal): 2(1/2)
Coolant tank I (gal): 500(132)

Weight kg(lbs.): 11800(26000)