fbpx

312-761-9396 | Se Habla Espanol

DCB
19041353567

Southwestern Industries TRAK CNC Bed Mill DPMEMX2, 2014 – EMX CNC Control, RSG, PDB, Auto Lube, Spray/Mist Coolant

$17,000.00

Request a Quote to Instantly See Pricing

Call Now

Machine Type: CNC/Manual Knee Mills
Make: TRAK
Model: DPMRMX2
Year: 2014
Machine Location: New Jersey
Stock #: 353567

Table Size: 49″ x 9″
Travel X axis: 32″
Travel Y axis: 16″
Travel Z axis: 23.5″
Quill Diameter: 3 3/8″
Maximum Quill Travel: 5″
Spindle Taper: R8
Spindle Speed Range: 60 – 4200 RPM
Spindle Center to Column Face: 18″
Spindle Motor Power: 3 HP
Power requirements, control: 110V; 1P; 10A
Power requirements, machine: 220/440V; 3P; 8.5/4.3A
Maximum Weight of Workpiece: 1320 lbs.
Height of table from bottom of bed: 33″
Max spindle nose to table: 27″
Min height: 90″
Max height 98″
Width of machine including table: 70″
Length with electric box door closed: 64″
Overall width incl full table traverse: 104″
Overall length with electrical door open: 72″
Footprint of Machine: 23″ x 40″
Weight net / shipping lbs.: 3200 / 3500
Rapid traverse X, Y, Z: 100 IPM

ProtoTRAK EMX CNC
Control Hardware Specifications
• Two-axis CNC, three-axis DRO
• Digital Servo Amplifiers – custom designed for ProtoTRAK operation
• D.C. Servo Motors – rated at 280 in-oz. Continuous torque are twice that required
• Precision Ground Ball Screws – in the table and saddle
• Modular Design – simplifies service and maximized uptime
• 115V/60HZ/15 amps
• Feedrate Override of programmed feedrate and rapid
• Polycarbonate Sealed Membrane Keypad and Gasket Sealed Control
• Enclosures to lock out contamination
• 2 USB ports for interface with a storage device
• 7.0” color LCD with adjustable contrast
• Rugged Industrial PC

Software
• Part geometry programming – the tool path is generated for you automatically
• Diameter Cutter Compensation – allows programming of the part rather than the center of the tool path
• Circular interpolation – makes arcs and any size hole easy to do with standard tools
• Linear Interpolation – to machine lines at any angle
• Conrad – provides automatic corner radius programming with one data input
• Incremental and Absolute – programming can even be mixed within an event
• Error Messages – to identify programming mistakes
• Fault Messages – for system self-diagnostics
• Program Downloading – from offline CAD/CAM systems via a modified FANUC 6 post-processor
• Teach – to program manual position and mill moves
• Parts Graphics display
• Look – a single button press to view graphics during programming
• Math Help – for finding points in a prompted format with graphical representation of prompts
• Machine Tool Error Compensation and Backlash Compensation custom set on mill after installation
• Selectable Inch/mm measurement readout
• Jog of X and Y from 1 to 100 inches per minute
• Continue Mill to eliminate repetitive data inputs while programming

Programmed Canned Cycles
• Posn/Drill – single point
• Bolt Hole – series of points evenly spaced around a circle
• Mill – straight line in any direction
• Arc – any portion of a circle
• Pocket – a rectangle or circle and all the material inside, includes finish cut
• Frame – a perimeter of a rectangle or circle, includes finish cut
• Repeat – of programmed events with or without offset

All specifications are assumed to be correct but must be confirmed by the purchasing entity.