fbpx

Gantry/Bridge Mills

Used Gantry & Bridge Mills For Sale

Please view the regularly updated inventory of used Gantry & Bridge Mills below. Inventory includes a variety of brands, sizes, and capacities. Below is our up-to-date selection of used Gantry & Bridge Mills. Our brands include but are not limited to: Cincinnati, Sanco, Viper, and much more. If you donโ€™t find the Gantry & Bridge Mills you are looking for, please contact us!

Revelation Machinery can always help you find what you need!ย  If you have any questions about Gantry & Bridge Mills or need to find a specific brand/type, please feel free to contact us!ย  If you need toย sell your used Gantry & Bridge Mills, do so here.

  • Reset

Found Results

2012
Chevalier
FVM-3016DCL
1999
Johnford
DMC 3000/1500/800
2017
Vision Wide
SF-3116
2022
Verona
PF-CNC Platinum
2014
Awea
VP-2012
2003
PAR Systems
XR 5225 Gantry Milling System

The process of milling uses a rotary cutter to remove the material in place. There are two main classes of the mill process.ย There is peripheral milling and face milling. Peripheral milling is when the cutting is done along the circumference of the actual cutter. It is primarily used when cutting deep slots and gear teeth. Face milling is when the cutting is primarily at the corners of the milling cutter. It is primarily used to cut flat surfaces into the material.

What is a gantry?ย  A gantry is, โ€œvarious spanning frameworks, as a bridge-like portion of certain cranes.โ€ย  It is a structure that moves on a rail system and bridges over the work area. The gantry is fixed on the rail and each axis is motorized so that it can simultaneously coordinate the movements to cut the material. ย  The x-axis is usually where the gantry rides on. This rail system is either pedestal mounted, floor mounted, or integrated onto the side of the table. These rails are made to support the weight of the entire machine as well as everything mounted to it.ย  The Y-axis is typically the bridge itself. The guiding system for the Y-axis is smaller than the X-axis rails. This is due to the fact that they only carry a small cutting tool and carriage. The weight of that is not even close to as heavy as the entire gantry itself.ย  The two axes move simultaneously to cut shapes out of the material. The gantry consists of a tool carriage (sometimes they have multiple tool carriages) that has its own drive motor to move in the Y-axis. On some machines, there is one motor that drives the Y-axis and the tool carriages (if multiple) are connected together by a mechanical device. ย  Most machine enthusiasts would say that Bridge mills are more rigid and robust than a Gantry mill although both could have similar capacities depending on the design.

CNCย Gantry and Bridge Mill machines hover over the material and because of this, are able to cut very large pieces of metal. They can machine from five sides of the workpiece as well. ย  Gantry and Bridge Mills are large machines that are primarily made for mass production. Some machines can span 100 feet wide and others can be as small as having a 2 by 2 cutting area.ย  They come in a wide variety of sizes!

Revelation Machinery can always help you find what you need!ย  If you have any questions about Gantry & Bridge Mills or need to find a specific brand/type, please feel free to contact us!ย  If you need toย sell your used Gantry & Bridge Mills, do so here.