Mori Seiki SH-40 HMC, 1996
$22,000.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
X-axis travel (Longitudinal movement of column): 560 (22.05)
Y-axis travel (Vertical movement of spindle head): 510 (20.08)
Z-axis travel (Cross movement of table): 510 (20.08)
Distance from table surface to spindle center: 50-560 (1.97-22.05)
Distance from table center to spindle gage plane:100-610 (3.94-24.02)
Table
Table working surface:400 x 400 (15.75 x 15.75)
Maximum workpiece swing diameter: 610 (24.01) dia.
Table loading capacity kg (lb.):
APC 5 sec.: 300 (660)
APC 7 sec.: 500 (1100)
Maximum workpiece height: 650 (25.59)
Table surface configuration: 24-M16 P = 80
Minimum table indexing angleยฐ: 1 [Rotary table type: 0.001]
Spindle
Spindle speed range min-1: 12000
Number of spindle speed ranges: 1
Maximum spindle torque: N โข m {kgf โข m} (ft โข lbf) 167 {17.0} (122.96)
Type of spindle taper hole: 7/24 taper No. 40
Spindle bearing inner diameter: Front: 70 (2.75)
Rear: 55
Feedrate
Rapid traverse rate mm/min (ipm): 32000 (1259.84)
Feedrate mm/min (ipm): 1-24000 (0.039-944.88)
Jog feedrate mm/min (ipm): 0-1260 (0-50) <15 steps>
ATC
MAS BT-40 tool shank
Spindle HP: 24.79 (30 KW) 30 Min. duty cycle
Machine height: 2517 (99.09)
Floor space: 2671 x 3837 (105.16 x 151.06)
Mass of machine kg (lb.): 8700 (19140)
Mayfran Chip Conveyor included