Okuma LU-45-1500 CNC Lathe, 1996 โ 21โณ Hyd. Chuck, OSP 7000L
$29,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Swing Over Bed: 33.07โณ
Swing Over Saddle: 21.85โณ
Distance Between Centers: 78.74โณ
Maximum Turning Diameter: 25.98โณ
Maximum Work Length: 78.74โณ
X-axis Travels: Upper Turret 17.32โณ/ Lower Turret: 12โณ
Y-axis Travels: Upper Turret 82.28โณ/ Lower Turret 79.72โณ
Speed Range: 12-2800 Rpm
Number Of Speed Ranges: 4 Ranges
Spindle Nose: Jis A2-11
Spindle Bore Diameter: 4.33โณ
Diameter At Front Bearing: 5.91โณ
Turret Type: Upper Turret V12 / Lower Turret V10
Number Of Tool Stations: Upper Turret 12 / Lower Turret 10
Tool Shank Height: 1.26โณ X 1.26โณ
Boring Bar Shank Diameter: 2.48โณ
Turret Indexing Time: 0.7 Seconds (lift Up)
Rapid Traverse Rate (x,z): 591 Ipm / 787 Ipm
Cutting Feed Rate: 0.0001-40.0 Ipr
Tailstock Quill Diameter: 5.12โณ
Tailstock Quill Bore Taper: Mt 5 (built-in)
Tailstock Quill Travel: 6.69โณ
Spindle Motor: 60/50 Hp
Coolant Pump Motor: 0.7 Hp
Power Kva: 54.3
Machine Height: 119.69โณ
Machine Floor Space: 238.58โณ X 111.49โณ
Machine Weight: 45,540 Lbs
Equipped With:
Okuma Osp7000l CNC Control
21โณ Chuck
Dual Turret
Tailstock
Chip Conveyor
Spindle drive repaired January 2019
New fiber optic cable installed March 2019
In daily use until late 2018