Rosler RMT 5 Multi-Tumbler Blast Machine, 2013
$74,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
The Machine Consist of the following Components:
Blast Cabinet:
-Constructed of 1/4 Inch Mild Steel
-Tumbling Barrel, where the parts are Blasted
-Lower Collecting Hopper with Dust Proof Seal
Work Door:
-Constructed of 1/4 Inch Mild Steel
-Two Hydraulic Cylinders to Operate Door and Mounting Frame
-Safety Valve on Door Cylinders
Tumbling Barrel:
-Three-Sided Pyramid is Centered on the Bottom of the Barrel. The Ridge and Pyramid arrangement creates a two-directional tumbling action of the work pieces and increases the blasting efficiency of the machine.
-Abrasive Drainage Utilizing 1/4 Inch Diamete Holes
-Barrel Inner Diameter: 34 Inches
-Max. Tumble Working Volume: 5 cu.ft.
-Max. Work load Capacity: 750 lbs.
-Min. Part Size: 3/8 Inch Cube
-Max. Part Size: 6 Inch Cube
-Max Individual Work Piece Weight: 50 lbs.
-Rotation Speed: 6 RPM
Blasting System:
-One Rosler Model JWL 315 D Blast Turbine
-Turbine Drive Motor: 15 Hp
-Rotation Speed: 3600 RPM
-394 lbs./min Abrasive Flow @ 250 ft/sec
Abrasive Recovery System:
-Collecting Hopper Below Cabinet
-Rubber Lagged Elevator Pulleys for Improved Traction
-Drive Motor for Elevator: 1 Hp
-Elevator Belt Transports Abrasive to Air Wash Separator
-Air Wash Separator Cleans Contaminants from Abrasive Work Mix
-12 Inch Wide Air Curtain
Safety System:
-Machine Safety Fence with Manual Gate
-Machine Interlocks to Prevent Personnel and Machine Hazard
Equipped with:
Low Hours
Control Allen-Bradley: Panelview C600
Dust Collection System