Sharp 1840TC-F CNC Teach Lathe, 2020 โ Low Hours, Tailstock, Fanuc Control
$24,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Swing Over Bed: 18 in.
Swing Over Cross Slide: 9 in.
Distance Between Centers: 39.4 in.
Spindle Speed: 43-250 rpm
Spindle Nose: D1-6 camlock
Spindle Bore: 2.37 in.
Cross Slide Travel: 10.63 in.
Bed Length: 82.5 in.
Bed Width: 14.5 in.
Quill Diameter: 2.93 in.
Quill Travel: 6.31 in.
Quill Center Taper: MT #5
Spindle Motor: Fanuc 10 HP
Approximate Weight: 5,732 lbs.
Dimensions: 8.33 x 4.58 x 6.08 ft.
Standard Accessories โ
Full enclosure splash guard
Electrical box to suit CNC Turning Control
4-way programmable tool post
Incandescent Work Lamp
Encoder for Spindle RPM
Electronic handwheel (MPG) X & Y Axis
Center sleeve MT#6 x MT#4
Two dead centers
Chip tray
Features โ
Operate as manual lathe with electronic handwheels
Operate as a full CNC lathe with programmable speed using M code or G code language
Operate semi automatically, combining manual and CNC operations
D1-6 camlock spindle, 2-3/8โ spindle bore
Geared head with 3 steps speed change, Automatic speed change
Inch/Meter threading Left or right-hand threading, single or multiple-start threading
FANUC Oi-TF CNC , 8.4โ LCD screen
18โ swing, 39.4โ between centers
D1-6 camlock, 2-3/8โ spindle bore,
10 HP motor
3 steps gear speed change (14-2,500 rpm)
Programmable spindle speed
Electronic Handwheel (MPG)
4-way programmable tool post
Auto lube system
Chuck & tailstock barrier
Chamfering on/off
Exact stop mode or one-time
Work shifts G 52-G59
programmable parameters
Canned cycles
Rigid tapping
Constant surface speed control
Direct input of offset value measured
Stored stroke check 1, 2 & 3
Chamfering and corner radius
Multi & continuous threading
DBC operation with memory card
Sub program call
Direct input of coordinate system shift
64 offset pairs
Mirror image
Program & sequence # search
Variable lead thread cutting
Customer macros
Circular interpolation by R programming
Spindle speed override
Tool nose radius compensation
DNC operation from memory card
Multiple repetitive canned cycles 1 & 2
**NEW Cost**
$57,000