Summit 20x80B Engine Lathe, 2005 – Tailstock, Taper Attachment, DRO
$11,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Swing over bed: 20.25″
Swing over cross slide: 11.875″
Swing over gap: 27.625″
Length of gap: 15″
Length of gap in front of face plate: 8.375″
Spindle speeds: 15
Spindle speed range: 11.5-1,400 RPM
Hole thru spindle: 4.125″
Spindle nose type: D1-8 Camlock
Headstock center: #6 MT
Headstock length on bed: 24.5″
Main spindle bearing outside diameter: 8.5″
Main spindle bearing inside diameter: 5″
Overall length of spindle: 34″
Quick change gearbox threads per inch: 1/4 – 60
Module threads: .125 – 30
Diametral pitch: 1 – 240
Long feeds: 0.00145 – 0.44474
Cross feeds: 0.0007 – 0.22237
Leadscrew diameter/range: 2″ / 2 T.P.I.
Feed rod diameter: 1″
Lubrication system: oil bath
Tailstock travel of spindle barrel: 9.5″
Diameter of spindle barrel: 2.938″
Taper of center: #5 MT
Tailstock body length of bed: 13.75″
Length of barrel graduations on spindle: 6″
Type of clamping on bed: bolts & lever clamp
Type of lubrication spindle: Reservoir
EQUIPPED WITH:
Taper attachment
Thread dial
Follow rest
Coolant
10 HP motor