Tsugami M08SY-II Turing Center, 2023 – LNS Bar Feed

Max machining diameter 280mm (11.02”)
Max bar capacity 65mm (2.56”)
Main spindle speed 4,500min
Back spindle speed 4,500min
Live tool speed 5,000min
Total number of turret positions 12
Rapid traverse rate X/Z X: 24 m/min Z: 27 m/min
Rapid traverse rate A/Y A: 27 m/min Y: 12 m/min
Main Spindle Motor 10/15 HP
Back Spindle Motor 7.4/10 HP
Live Tool Motor 1.2/5 HP
Width × Depth × Height 106”×74”×75”
Weight 13,228 lbs

12 Position Turret with All Positions Driven
300 PSI High Pressure Coolant Thru Turret and Ejector
Y Axis Turret Positioning by Compound Slide with 3.94” Total Stroke
All Stations Live Tool Capable with 5Hp live tool motor
Integrated Motor Main Spindle with C-axis and Brake
2 Speed Electronic Winding on Main Spindle for high torque at lower speeds
Integrated Motor Sub Spindle with C-axis and Brake
Spindle Chiller circulating temperature controlled oil to Main and Sub spindle
Rigid Tapping on Main, Sub, and Live tool
Spindle and Turret Air Purge
Tool Touch Setter, Manual Swing Down
8” 3 Jaw Hollow Chuck on Main Spindle
2.56” Bar Capacity Through Main Spindle
6” 3 Jaw Hollow Chuck on Sub Spindle
2.04” Though Sub Spindle Bore
Foot Switches for Main and Sub Chucks
Pneumatic Ejector, 5.5” stroke (3295-Y1471)