XENA 5A 5-Axis CNC Horizontal Boring Mill 130mm 3.2M, 2017

*Includes 1 Year Warranty
**Under 500 hours use

XENA TACHYON / FAGOR
3 modes on the same 15” touch screen.
– Manual mode
– Manual assisted mode TACHYON
– FAGOR 8070 “‘CNC’ ‘mode, conversational, or/and G code
– Controller: 5 simultaneous axis

Note that our TACHYON / FAGOR controller has the ” TeamViewer ” interface, by which it is possible to check and diagnose machine, remotely via the internet.

Avoiding costly, and often unnecessary technician traveling when it comes only to parameters and/or programming.

SPECIFICATIONS
Table: 72 ” x 63″
Max weight table 17,000 lbs
Height of table : 56 ”

TRAVEL
X-axis 126″
Y-axis 78.7″
Z-axis 78.7″
W-axis 35.4″

SPINDLE
Diameter 130mm (5.1)
Nose: BT-50 or CAT-50
Speed (RPM) 10 -2000
Spindle motor: (26HP @ 30 min)
Speed ratio 3 (gearbox)

FEED
Fast feed (X-Y-Z) 10M / min (472’’./min)
Fast feed (W): 6M / min (400’’/min)
Cutting feed: 5M / min (200’’/min)
Table ” B ”: 4 RPM

ATC
Number of tools: 60 tools (BT or CAT-50) ” ARM TYPE ” (currently on BT)
Max tool weight: 55 lbs
Max tool length: 15.7
Max tool diameter: 5 (10 in. Without adjacent tools)
Change time: 15 sec.

Machine weight: 118,000 lbs
Floor space: 295 x 301 ” (See attached drawing)
Height: 213.5 ”
Voltage: 440V 60Hz 3ph

Included :
Axis “B” @ 360,000 position (+/- 10 μ) with possibility of machining in 4 simultaneous axes on the table.
Spindle cooler
Automatic power off
Hydraulic unit
Coolant system
Automatic lubrication
Alarm light tower
LED full interior lighting
M.P.G. 5 axis
Linear positioning glass scale on the X, Y, Z axes
Heat exchanger
Chip conveyors

Other accessories included: (see details at the bottom of the pages)
PROBE Renishaw (RTS + RMP60 (Q) + RMI-Q) Automatic tool length & workpiece probing system
5th axis installed on table with base (see photos below)

Includes:
Rotary table with a 3-jaw hydraulic chuck (20 ”) with a 6 ” bore
HD rolling center with a 3-jaw hydraulic chuck (16 ”)
Hydraulic brakes on both ends
CTS “Coolant” High pressure through spindle) (15bar = 215 psi)
Full enclosure (required with CTS)
W 400mm extension support (for vibration-free power machining up to the center of the table) (See photos below)
Permanent adapter for: (combined with tool changer)
2 heads at 90 degrees: (1) mini 50/30 + (1) STD 50/50 (see photos below)
1 straight extension 50/50 (see photos below)