98″ Column to Spindle x 22″ Column Radial Arm Drill, Sharp RD2500, 2012 – Very Little Use

$97,500.00

98" x 22" Column Radial Arm Drill, Sharp RD2500

This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:

22” column diameter
MT#6 spindle
10 HP motor
98” column to spindle center
Drilling : 3.9” cast iron, 3.1” steel
Boring : 8.2” cast iron, 6.5” steel
Hardened and ground arm slide ways and gears
Double tube column design to increase rigidity
Arm elevation controlled by electric motor
Built-in automatic tool ejector
Safety device prevents arm from dropping even when bronze nut is worn out
T-slots and drain channels on box table
Box table
Coolant system
Auto spindle reverse for tapping
Work light
Tool box

Specifications
Diameter of column: 21.65”
Distance from column surface to spindle center, max.: 98.42”
Distance from column surface to spindle center, min.: 19.68”
Travel of spindle head: 78.74”
Distance from base surface to spindle end, max.: 78.74”
Distance from base surface to spindle end, min.: 21.65”
Elevating height of arm: 39.37”
Effective area of table: 39.37” x 31.49” x 22.04”
Dimensions of base: 138.58” x 55.12” x 12.60”
Taper hole in spindle: MT #6
Stroke of spindle: 17.72”
R.P.M. of spindle (rpm range x steps): 16-1250 x 16 Steps
Feed of spindle (1PR x steps): 0.0016-0.126” x 16 Steps
Main motor: 10 HP
Elevating motor: 5 HP
Coolant equipment: 0.25 HP
Machine height from floor, max.: 13.09’
Base + column height: 12.63’
Measurement (LxWxH): 13.12’ x 5.25’ x 12.63’
Net weight: 24,200 lbs
Approximate shipping weight: 27,500 Lbs.
Cast Iron:
Drilling: 3.15”
Capacity Tapping: 3.94”
Steel:
Drilling: 2.56”
Capacity Tapping: 2.95”
Total Power Consumption (220V): 18 KVA/50 amps