Okuma 2SP-250H Twin Spindle Twin Turret CNC Lathe, 2017 – Chip Conveyor, Robot Loader, Transformer, Inspection Reports from Gosiger
$79,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Max Turning Diameter: 8.66″
Max Turning Length: 5.91”
Travel X-Axis: 5.91”
Z-Axis: 6.10”
Speed Range: 50-4500 rpm
Turret Type: V12 NC
Motor Spindle Drive: 15/10 hp
Equipped With:
Okuma OSP-P300LA Control
Robot Loader
Chip Conveyor
Transformer
220/480, 3 Phase, 60 Hz, 55.1 kVA, Full Load Current 144.7 / 66.3 A, Largest Motor Rating 48 A, Interrupting Capacity 30 / 10 kA, SCCR of Control Panel 10 kA
**Have Inspection Reports from Gosiger**
Machine powered on without any major alarms
Had to set the coolant low input and air PSI input in order to move the axis
Machine had a battery life alarm due to being out of service, backups performed
The machine had a broken load cable track on top and was missing the chucks R-L side
Axis and spindle operate normally
Loader axis operate normally
Machine was test without stocker table installed and appears that when it was in operation the parts were placed on a conveyor. inbound outbound.