Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 – Low Hours, MTA Bar Feeder

$35,000.00

Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 - Low Hours, MTA Bar Feeder - Image 2

Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 - Low Hours, MTA Bar Feeder - Image 3

Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 - Low Hours, MTA Bar Feeder - Image 4

Hanwha XD32H CNC 7-Axis Swiss Lathe, 2008 - Low Hours, MTA Bar Feeder - Image 5

This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:

Machining Capacity:
Maximum Bar Capacity Round: 1.250”
Maximum Bar Capacity Hex: 1.062”
Maximum Bar Capacity Sub-Spindle: 1.250”
Tapping Capacity Main Spindle: 0.312”
Front Ejection from the Sub-Spindle: 3.000”
Rear Ejection from the Sub-Spindle: 11.000”
Drilling Capacity on the Sub-Spindle: 0.393”
Tapping Capacity on the Sub-Spindle: 0.312”
Drilling Capacity on the Cross Drill: 0.275” / 0.393”
Tapping Capacity on the Cross Tap: 0.250”

Main Spindle:
Spindle Speed: 300 to 8,000 RPM
AC Spindle Drive Core Motor (Chilled): 7.5 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z1-Axis Horsepower: 2.0 HP
Z1-Axis Stroke: 12.500”
Z1-Axis Rapid Traverse: 1,200 IPM

Sub-Spindle:
Spindle Speed: 300 to 7,000 RPM
AC Spindle Drive Core Motor: 3 HP
C-Axis Control Minimum Programmable Angle: 0.001 Deg.
C-Axis Locking Gear: Every 1.0 Deg.
Z2-Axis Stroke: 12.500”
Z2-Axis Rapid Traverse: 1,200 IPM
Z2-Axis Horsepower: 2.0 HP

Cross Working Spindles:
Spindle Speed: 200 to 6,000 RPM
AC Spindle Drive Geared: 1.7 HP

Tool Position:
O.D. Tool Positions:5
O.D. Tool Shank: 0.625” Sq
Cross Mill / Drill Stations: 4
Main Spindle I.D. Tool Positions Total (ER-16 Type): 7
-5 Stationary from the Main Tool Stand
-2 Powered Face Mill / Drill stations independent from the Main Tools
Sub-Spindle I.D. Tool Positions Total (ER-16 Type): 9
-5 Stationary from the Main Tool Stand
-2 Stationary Independent from the Main Tools
-2 Gear Driven Independent from the Main Tools to 6,000 RPM

Coolant / Lubrication Systems:
Coolant Pump Motor: 0.6 HP
Coolant Tank Capacity: 45 Gallons
Way Lube Tank Capacity: 0.48 Gallons

Machine Dimensions: 65″W x 94″L x 69″H
Weight 9,500 LBS

General Specifications:
Voltage: 3 Phase 200V-220V
Power Required: 30 KVA
Compressed Air: 80 PSI

Equipped With:
– MTA Eagle Bar Feeder
– Fanuc 18iTB System 2 Path
– Full C-Axis, Both Main and Sub Spindles
– Rigid Tapping
– Cross Drilling Unit
– Part Conveyor
– Part Separator
– Air Blow Unit
– Assorted Collets and Tooling