Nakamura Tome WT-150IIMMY CNC Multispindle Lathe, 2016 – Bar Feeder Included – LOW HOURS!
$199,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Max. Turning Diameter 7.5โ
Standard Turning Diameter 6.7โ
Distance Between Centers max. 29.6โ, min. 7.9โ
Max. Turning Length 20.3โ
Bar Capacity 2โ
Axis Travel
Slide Travel X1 / X2 6.6โ
Slide Travel Z1 / Z2 20.3โ
Slide Travel Y +/-1.4โ
Slide Travel (B-axis) 23.7โ
Rapid Feed X1 / X2 630 IPM
Rapid Feed Z1 / Z2 1575 IPM
Rapid Feed (B-axis) 1575 IPM
Rapid Feed Y 236 IPM
Left and Right Spindles
Spindle Speed 5000 RPM
Spindle Speed Range Stepless
Spindle Nose A2-5
Hole Through Spindle 2.5โ
Hole Through Draw Tube 2โ
C-axis
Least Input Increment degrees 0.001
Least Command Increment degrees 0.001
Rapid Index Speed 600 RPM
Cutting Feed Rate 1~4800 deg/min
C-axis Clamp Disk Clamp
Upper and Lower Turrets
Type of Turret Head Dodecagonal Drum Turret
Number of Tool Stations 24
Number of Indexed Positions 48
Tool Size Square / Round 1โ / 1.3โ
Rotating Tool
Rotary System Individual Rotation
Spindle Speed rpm 6000 RPM
Drive Motor
Left Spindle 20 / 15 HP
Right Spindle 15 / 10 HP
Driven Tools 7.5 HP
Machine Dimensions (L x W x H) 142 x 78 x 73
Machine Weight 19,621 lbs
Equipped With:
NOTE: Cutting Tools inside the holders ARE NOT INCLUDED
NT SmartX Control
2 Turrets
Y-Axis ( upper turret)
Milling ( lower turret)
2 S-20 Collet Chucks
1 Kitagawa B-206 3 Jaw Chuck
C-Axis
High Pressure Coolant
LNS Chip Conveyor
Parts Catcher G
Parts Conveyor
LNS Quick Load Servo S3-T Bar feed
Spindle Liners
(1) KZ1510 CROSS MILL/DRILL ER25, 16912076
(1) KZ1510C CROSS MILL/DRILL ER25, COOLANT THRU
(1) KZ1510S CROSS MILL/DRILL, 2:1 SPEEDER, ER20, MA2.5S RT 2:1 16912031
(3) KZ1513 FACE MILL/DRILL ER25
This is a low hour, one shift machine that machined mostly 3/16โ Stainless
220 Volt 3 Phase 60 Cycle