15″x48″ Clausing Colchester Lathe, 1960s
$5,300.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Height Of Centers: 7.5″
Swing Over Bed: 15″
Over Cross Slide: 8.75″
Distance Between Centers: 48″
Diameter of Faceplate: 14″
Gap-Bed Models
Turning Diameter in Gap: 24″
Width In Front Of Faceplate: 6″
Capacity of Travelling Steady Rest: 2.5″
Overall Length: 92″
Overall Width: 38″
Weight (approx): 2,296
Headstock
Spindle Bore (Max. Bar Diameter): 2″
Spindle Nose: A.S.A Long Taper L.1
Taper In Spindle Nose Bush: No. 4 Morse
Spindle Speeds (Two-Speed Motor): 16
Range Of Spindle Speeds (2 Speed Motor): 37-1,500 r.p.m.
Carriage
Total Travel Of Cross Slide: 9″
Total Travel Of Top Slide: 4.75″
Height From Top Of Top Slide To Center Of Spindle: 1 5/8″
Max. Tool Shank Size (Pillar Type Tool Post): 5/8×1″
Threads And Feeds
Pitch Of Leadscrew: 4 t.p.i.
Number Of Threads: 45
Range: 4-120 t.p.i.
Number Of Feeds: 45
Range per rev. of Spindle
Longitudinal: .0017-.048″
Cross: .0008″-.024″
Tailstock
Spindle Travel (No. 4 M.T. Center Fitted): 6 3/4″
Spindle Travel (Standard Tang Drill Fitted): 5 1/4″
Taper in Spindle: No. 4 Morse
Drive
Two-Speed Motor: 2.5-5 h.p.
3 phase
Auto feed and the thread cut need repair