312-761-9396 | Se Habla Espanol



1997 Mazak SQT 18MS CNC Lathe with Sub-Spindle & Live Tooling


This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:

Max. Swing: 20.90″
Swing Over Carriage: 15.74″
Max. Machining Diameter: 11.75″
Max. Distance Between Spindles: 34.25″
Max. Bar Work Diameter: 2.51″
X-Axis Stroke: 7.125″
Z-Axis Stroke: 22.75″
Speed: 35 ~ 4000 RPM
Number of Spindle Speed Ranges: Stepless
Spindle Nose: A2-6
Spindle Bore: 2.99″
Min. Spindle Indexing Increment: 0.001″
Second Spindle Speed: 180 ~ 4000 RPM
Second Headstock Stroke: 23.25″
Second Headstock Rapid Traverse Rate: 708 IPM
Turret Type: Dodecagonal Drum
Turret Tool Capacity: 12 Tool Total
Tool Shank Height: 1.00″
Boring Bar Shank Diameter: 1.50″
Turret Indexing Time (Chip-to-chip): 1.6 sec/step
Rotary Tool Spindle Speed: 120 ~ 3000 RPM
Rapid Traverse Rate (X,Z): 1180 IPM
Jog Feedrate (X,Z): 0.04 ~ 78.74 IPM
1st spindle Motor (30 min / continuous rating): 25 / 20 HP
2nd spindle motor (10 min. rating): 10 HP
Rotary Tool Motor: 10 min rating
Coolant Pump Motor: 0.25 HP
Electric Power Source (30 min / Continuous rating): 48.8 kVA / 38.6 kVA
Air Supply: 71 PSI / 3.53 Ft /Min
Coolant Tank Capacity: 52.8 Gallons
Machine Height: 80.3″
Floor Space Requirement: 124.4″ x 63.4″
Machine Weight: 12,500 Lbs
Mazatrol T-Plus Control

Equipped with:
Live Tooling
Full C-Axis on Main Spindle
C-Axis on Sub-Spindle
Maximum memory capacity
Automatic door
Parts Catcher
Chip Conveyor
10″ Kitagawa main chuck, with hard jaws and MANY soft jaws
6″ Kitagawa sub-spindle chuck
ATS 22J Dead Length collet chuck ( Main spindle )
ATS 3J Dead Length collet chuck ( Main Spindle )
ATS 3J Dead Length collet chuck ( Sub-spindle)
Many Live tool holders
Many static OD & ID holders
Spindle Liners
Total Cut Hours, 8,164

**Video Available Upon Request