2018 Haas VF-2SS APC Brand New Midaco A30SD
$104,500.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
TRAVELS
X Axis 30.0 in
Y Axis 16.0 in
Z Axis 20.0 inm
Spindle Nose to Table (~ max) 24.0 in
Spindle Nose to Table (~ min) 4.0 in
SPINDLE
Max Rating 30.0 hp
Max Speed 12000 rpm
Max Torque 90 ft-lbf @ 2000 rpm
Drive System Inline Direct-Drive
Taper CT 40
Bearing Lubrication Air / Oil Injection
Cooling Liquid Cooled
TABLE
Length 36.0 in
Width 14.0 in
T-Slot Width 0.630 in
T-Slot Center Distance 4.92 in
Number of Std T-Slots 3
Max Weight on Table (evenly distributed) 1500 lb
FEEDRATES
Max Cutting 833 ipm
Rapids on X 1400 ipm
Rapids on Y 1400 ipm
Rapids on Z 1400 ipm
AXIS MOTORS
Max Thrust X 1995 lbf
Max Thrust Y 1995 lbf
Max Thrust Z 3085 lbf
TOOL CHANGER
Type SMTC
Capacity 30+1
Max Tool Diameter (full) 2.5 in
Max Tool Diameter (adjacent empty) 5.0 in
Max Tool Length (from gage line) 11 in
Max Tool Weight 12 lb
Tool-to-Tool (avg) 2.8 s
Chip-to-Chip (avg) 3.6
GENERAL
Coolant Capacity 55 gal
AIR REQUIREMENTS
Air Required 4 scfm @ 100 psi
Inline Air Hose 3/8 in
Coupler (Air) 3/8 in
Air Pressure Min 80 psi
ELECTRICAL SPECIFICATION
Input AC Voltage (3 Phase) – Low 220 VAC 220 VAC
Full Load Amps (3 Phase) – Low 70 A 70 A
Input AC Voltage (3 Phase) – High 440 VAC 440 VAC
Full Load Amps (3 Phase) – High 35 A
Equipped With
Midaco Series A30SD Pallet Changer
Provision to accept pallet changer
High Speed Machining
Thru Spindle Coolant
Wireless Intuitive Probing System
High Pressure Coolant
Less than 40 cutting hours