Elumatec SBZ 151 10.3M 5-Axis Profile Machining Center, 2009
$79,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Minimum Profile Length: 19.7″
Maximum Profile Length: 33.8′
Minimum Profile Weight: 1.3 LBS
Maximum Profile Weight: 330 LBS
Maximum Tool Diameter: 9.8″
Maximum Tool Length: 7.9″
Tool Holder Type: HSK-F63
Number of Controlled Axes: 5
X-Axis Stroke: 33.8′
Y-Axis Stroke: 15.7″
Z-Axis Stroke: 25.6″
A-Axis Range: +/- 120 Degrees
C-Axis Range: +/- 360 Degrees
Machining Length: 33.8′
Machining Width: 5.9″
Machining Height: 4.1″
Maximum Spindle Speed: 24,000 RPM
ATC: 8 Position
Maximum feed rate: 213 FPM
Tool Shank Diameter: 1.25″
Tool Change Time: 6 Seconds
Main Spindle Power: 12.6 HP
Dust Extraction Port Diameter: 4.9″
Compressed Air Supply: 87 PSI
Electrical: 480 VAC 60 HZ 3PH
Machine Weight: 17,637 LBS
Machine Dimensions: 57.4’L x 9.8’W x 8.2’H
Equipped With:
– 150 20 60 02 Cooling Device for Cont. Temp. Over 30C
– 130 20 60 05 USV for IPC
– 150 20 33 01 Network Connection PC
– 150 20 60 05 Mobile Operation Terminal with Start-Stop Speed Regulation
– (x4) 136 35 0817 Collet Holder ER 32 for Collets 2-20 mm, HSK-F63
– (x2) 136 35 08 00 Quick-Action Chuck for Chucking Capacity 1-10mm, HSK-F63
– 150 31 13 02 Carb.-Saw Blade T=34, D=180 mm,3.5 mm,d=20, pos.
– 136 35 08 21 Seat (HSK-F63, d20) for Disk Cutter
– 151 20 91 00 Tool Support for Angle Router Head (HSK-F63)
– 150 20 61 14 Tapping without Compensation
– 151 20 63 03 Independent Clamping Adjustment for 12 Clamps
– 151 20 91 01 Saw Blade Holder, HSK-F63 with Saw Blade D=500, T=120
– 151 35 08 00 Saw Blade Support, HSK-F63, D=100, d=32, 6 x M8
– (x3) 130 35 10 00 Collet 7-8 mm, ER 32, Double-Slotted
– (x3) 068 3650 03 Cutter 3 x 10 mm, L=60 mm, S 8
– (x3) 068 36 50 05 Cutter 5 x 14 mm, L=60 mm, S 8
– (x3) 068 36 50 08 Cutter 8 x 14 mm, L=80 mm, S 8