Essentium HSE 180S HT 3D Printer, 2022 – Needs out ASAP!

-Print Head: Single Head
-Build Volume: 690mm x 500mm x 650mm
-Nozzle Diameters Accepted: 0.4mm and 0.8mm
-Nozzle Temp: Up to 550°C
-Bed Temp: Up to 200°C
-Part Temp: Up to 180°C
-Filament Diameter: 1.75mm
-Connectivity: 10/100 base T connection, Ethernet Protocol
-Enclosed Chamber: Yes
-Sealed Chamber: Yes
-Current of the Main Circuit Breaker: 50A
-Rated Voltage: 200-240V
-Max Operating Current: 30A
-Single Phase/2 Phase
-Frequency: 50/60Hz
-Largest Load Current: 10A
-Dimensions: 62.6″ x 49.2″ x 98″
-Weight: 1,980 lbs
-I have spare nozzles for it as well so it has 3 nozzles total. Two are .8mm and one is a .4 mm nozzle.
-Less Than 100 hours