fbpx

312-761-9396 | Se Habla Espanol

 

1195553631

Hurco VMX 64

This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:

Capacity: VMX64 40 taper
X, Y, Z -axis Travel 64”, 34”, 30”
Table Working Surface 66” x 35”
Table T-Slots 7 x .71 on 4.92 Centers
Maximum Table Load 6000 lb.
Spindle Nose to Table 6” to 36”
Coolant Capacity 140 gallons
Spindle: VMX64 40 taper
Spindle Taper CAT 40
Spindle Speed 12,000 RPM
Spindle Motor Horsepower (1 min.) 24 HP
Spindle Motor Torque (1 min.) 175 lb-ft @ 720 RPM
High Torque Option RPM 10,000 RPM
High Torque Option Rating 210 ft-lb @ 600 RPM
Motion: VMX64 40 taper
Rapid Traverse Rate X,Y (ipm) 709 ipm
Rapid Traverse Rate Z (ipm) 530 ipm
Cutting Feed Rate 600 ipm
Least Command Increment 0.0001”
Positioning Accuracy -/+ 0.0002”
Repeatability -/+ 0.0001”
Automatic Tool Changer: VMX64 40 taper
Number of Stations 24 / CAT 40
Tool to Tool ATC Time 3 Seconds
Tool Changer Type Electronic
Maximum Tool Diameter 3.2”
Maximum Tool Length 11.8”
Floor Space Required (W x D x H) 155.0” x 104.7” x 121”
Maximum Operating Dimensions (W x D x H) 249.5” x 186.2” x 121”
Machine Weight 29,920 lbs
Machine Shipping Weight 32,120 lbs
Machine Shipping Dimensions (W x D x H) 175.2” x 113.8” x 131.9”
Voltage Required 208-240 VAC / 60Hz
Power Rating / Full Load KVA 38 KVA
Air Requirements 5 CFM @ 80-100 psi