InLine Filling Systems Complete Liquid Packaging Line FOFNT48 Automatic High Performance Filler, 2019

CONTAINERS: 64 oz rectangle with handle // 32 oz square
CAPS: 53mm
LABELS: Front and back on 64 oz // 3 sided on the 32 oz square
ESTIMATED RATE OF PRODUCTION: 22 – 26 bpm on 32 oz // 16 – 20 bpm on 64 oz

45 IN DIAMETER VALUELINE S/S UNSCRAMBLER TURNTABLE:
Standard features:
-All Stainless Steel Tubular open frame construction.
-Standard speed setting is 0 to 7 rpm or 82.5 feet/min.
-Variable speed, sealed, fused/surge protected DC motor w/ 550 inch/lbs torque.
-Turntable glides on rubber, self lubricating bearings for quiet operation.
-Turntable height is 35 inches adjustable to 40 inches.
-Foot pads are fully articulating and vibration resistant.
-Unique floating bearing removes downward thrust on drive armature to ensure long
life.
Utilities: Electric: 110 VAC 6 Amps
Dimensions: 24″ x 24″W base footprint adjustable to 40″H

MODEL FOFNT48: OVERFLOW FILLER:
Exclusive Features:
-Expandable at low cost by adding fluid path modules: no factory modifications
required.
Standard Features:
-Constructed of Heavy Duty stainless steel 2″ square tubing for extreme strength and
rigidity,
-Completely washdown capable,
-Automatic drip tray to protect bottles from nozzle product dripping,
-Automatic conveyor mounted bottle indexing gates to control container movement,
-No tools required nozzle mounts and bottle indexing gates,
-Precision handwheel height adjustment

OVERFLOW TANK SS LARGE (SANITARY DUTY) W/ LEVEL CONTROL:
-316 Stainless Steel construction with cover,
-All stainless “2B” finish frame,
-Manual 1.5″ discharge stainless ball valve for drainage,
-Integrated float switch and controls for shut-off valve and customer supplied bulk
product pump,
-Control system outputs for both air signal and 24 volt signal for air diaphragm bulk
supply pump or electric supply pump (Customer supplies appropriate electric contact
if using electric pump).
Dimensions: 53″‘ L X 24″ W X 40″ H

CENTRIFUGAL PUMP 100 GPM SANITARY DUTY A/C S/S MOTOR:
-Pump speed is controlled by the filler’s PLC for three stage (fast/slow/dwell) filling,
-Sanitary construction in 316 stainless steel construction with Tri-clamp connections,
-CIP (Clean In Place) capable,
-Temperature range: up to 212 degrees F.
-Throughput: up to 100 gpm depending on pump speed and product viscosity,
-Variable speed 1.5 hp AC stainless steel washdown capable motor.

4 PORT SANITARY MANIFOLD SYS WITH TRICLAMP CONNECTS:
-Manifolds are 316L Stainless Steel construction for food grade and chemical
resistant applications,
-Polished manifold fluid paths provides for faster cleaning and reduces cross
contamination issues between products,
-Manifold sections and nozzle hose fittings use Tri-clamp connections for ease of
cleaning and expansion without tools

HIGH SPEED DOUBLE BELT BOTTLE SPACER:
-16″ long belt length
-Variable speed from 0-125 ft/min variable speed
-Two direct drive 90 vdc motors
-Sturdy 1.5IN tubular frame mounts directly to conveyor

COMPUTORQUE NT CAPPING MACHINE (LEFT HAND):
Capping speed: up to 200 cpm depending on cap size and container configuration.
Cap size range: up to 120 mm including child resistant caps.
Container size range: (height) 1-1/2″ to 15″ (width) 1/2″ to 7″ in plastic, metal, or glass.
Dependent on conveyor height.
Exclusive Feature:
-Patented cap tightening system of rotating belts permits Single point tool-less cap
width adjustment for the fastest changeover in the industry

ENERCON SUPER SEAL 75 INDUCTION SEALER:
-Power supply with advanced IGBT circuitry,
-High efficiency sealing head,
-Adjustable sealing head support/mount,
-Membrane control panel with digital meter & NEMA 4 rating for washdown,
-Mobile stainless steel cart with casters & leveling pads

UNIVERSAL CP-1000 FRONT/BACK LABELER:
-Labeler speed: Front and Back: up to 200 cpm depending on container and label
sizes.
-Label size range: 1/2″ to 6″ wide, 10″ maximum length for round containers.
-Label roll specification: die cut labels with 1/8″ spacing on a 12″ outer diameter roll
(max) with a 3″ inner core

VIDEOJET 1220 INK JET CODER:
-Password protected programming,
-IP55 Stainless Steel (washdown capable) cabinet,
-WYSIWYG message creation, QWERTY keypad,
-Automatic printhead flushing during start up and shut down,
-Airless operation, internal pump eliminates need for factory air,
-Caster equipped mobile printhead stand,
-Product Detector,
-Power Conditioner,
-Fluid supplies starter pack

STAINLESS DC VARISPEED 4 1/2 IN FLEX CHAIN CONVEYOR W/ TURN:
Custom designed per customer’s layout drawing this variable speed conveyor with
4-1/2″ wide chain is designed for changing the flow direction of a conveyor line 90
degrees.
15′ straight, left turn, straight 5′, left turn and 3’ straight.
Features:
-Chain is powered by a washdown capable 1/2 hp 90vdc drive/gear box combination,
-Variable speed controller and emergency stop mounted in sealed, NEMA 4X
enclosure,
-Heavy duty 12 gauge 8IN high 304 stainless steel frame,
-Close tolerance UHMW wear strips, 3/8 thick (50% thicker than industry norm),
-Sealed, lubrication free, composite driver bearings,
-Stainless steel legs with self-articulating feet,
-Complete with all supporting rails and transition pieces