JD2 RC6 CNC Tube & Pipe Cutter, 2021 – With Powermax 85 Plasma Unit and Accessories
$54,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Available Length: 12′
Maximum Outside Diameter Size Capacity while using tube stabilizer:
6″ schedule 40 Pipe
4″ Square Tubing
4″ Channel
4″ Angle Iron
Maximum Outside Diameter Size Capacity not using tube stabilizer:
8″ schedule 40 Pipe at reduced length
6″ Square Tubing
5″ Channel
5″ Angle Iron
Max Cutting Dimensions for 12′ Machine:
Y-axis 10.5′ , X- axis 12.5″ , Z-axis 7″
Max Cutting Dimensions for 24′ Machine:
Y-axis 22.5′ , X- axis 12.5″ , Z-axis 7″
Motors: Brushless Servo Motors on all axis
Machine Power Requirements: 190-240VAC, 1PH with Neutral, 50/60Hz, 30A. Machine only. Optional automatic router control increases required amperage to 40A.
Powermax 85
Input voltages:
CSA 200 โ 480 V, 1-PH, 50/60 Hz
200 โ 600 V, 3-PH, 50/60 Hz
CE 380/400 V, 3-PH, 50/60 Hz
Input Current @12.2 kW
CSA 200/208/240/480 V, 1-PH, 70/68/58/29 A
200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A
CE 380/400 V, 3-PH, 20.5/19.5 A
Output current:
25 – 85 A
Rated output voltage: 143 VDC
Duty cycle @ 40ยฐC (104ยฐF)
CSA 60% @ 85 A, 230 โ 600 V, 3-PH
60% @ 85 A, 480 V, 1-PH
50% @ 85 A, 240 V, 1-PH
50% @ 85 A, 200 โ 208 V, 3-PH
40% @ 85 A, 200 โ 208 V, 1-PH
100% @ 66 A, 230 โ 600 V, 1/3-PH
CE 60% @ 85 A, 380/400 V, 3-PH
100% @ 66 A, 380/400 V, 3-PH
Open circuit voltage (OCV):
CSA 305 VDC
CE 270 VDC
Dimensions with handles: 500 mm (19.7″) D; 234 mm (9.2″) W; 455 mm (17.9″) H
Weight with 7.6 m ( 25′) torch: 71 lbs
CE 28 kg (62 lbs)
Gas Supply: Clean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate / pressure Cutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi)
Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi)
Input power cable length: 3 m (10′)
Power supply type Inverter – IGBT