Mori NH-6300 DCGII CNC HMC, 2013 – TSC, Pallet Pool, Chip Conveyor, 330 Tool Magazine, Probing

Axes And Travel

X-Axis Travel: 41.3″
Y-Axis Travel: 35.4″
Z-Axis Travel: 38.6″
Distance From Pallet Surface To Spindle Center: 3.9 – 39.4″
Distance From Pallet Center To Spindle Gauge Plane: 3.9 – 42.5″

Pallet

Distance From Floor Surface To Pallet Surface: 49.2″
Pallet Working Surface: 24.8 x 24.8″
Pallet Loading Capacity: 3,300 Pounds
Max. Workpiece Swing Diameter: 41.3″
Max. Workpiece Height: 51.1″
Pallet Surface Configuration: 24 Holes, M16 Tap, Pitch 5″
Minimum Pallet Indexing Angle: 1°
Pallet Indexing Time (Including Clamping And Unclamping): 2.0 Seconds (90°), 2.5 Seconds (180°)

Pallet Pool – CPP

Number of Pallets: 11 (modular, can add more)
Speed (with/without pallet) 131.2/82.0 ipm
Workpiece Setup Specifications: 45 Degree Turn Table System

Spindle

Max. Spindle Speed: 10,000 RPM
Number Of Spindle Speed Ranges: 1
Type Of Spindle Taper Hole: CAT50
Spindle Bearing Inner Diameter: 3.9″

Feedrate

Rapid Traverse Rate: X, Z: 1,968.5 Ipm, Y: 1,968.5 Ipm
Cutting Feedrate: X, Y, Z: 0.04 – 1,968.5 Ipm (Look-Ahead Control)
Max. Rotational Speed: B: 38.5 RPM
Jog Feedrate: 0 – 197.0 Ipm (20 Steps)

ATC

Type Of Tool Shank: CAT50
Type Of Retention Knob: DMG MORI 90° Type, 45° (MAS-I), 60° (MAS-II), HSK-A100, DIN
Tool Storage Capacity (Including One Tool At The Spindle Side): Chain-Type: 330
Max. Tool Diameter (With Adjacent Tools): 4.3″
Max. Tool Diameter (Without Adjacent Tools): 12.5″
Max. Tool Length: 24.8″
Max. Tool Mass: 66 Pounds
Max. Tool Mass Moment (From Spindle Gauge Line): 21.6 Ft-Lbf
Method Of Tool Selection: Fixed Address, Shorter Route Access
Tool Changing Time: Tool-To-Tool: 1.7 Seconds, Cut-To-Cut (Chip-To-Chip): MAS: 4.4 Seconds, ISO 10791-9/JIS B6336-9: 16.6/4.5 Seconds (max./min.)

Motor

Spindle Drive Motor: 10,000
Feed Motor: X/Y/Z Axes: 6×2/7.5/7.5×2 HP, B Axis: 4 HP
Coolant Pump Motor: 1.5 HP (Spindle), 1.5 HP (Chip Removal), 3 HP (Shower Coolant)

Power Source

Electrical Power Supply: 66.0 kVA
Compressed Air Supply: 72.5 Psi, 158.4 Gpm
Tank Capacity: Coolant Tank Capacity: 245.5 Gallons

Machine Size (without CPP)

Machine Height (From Floor): 134.4″
Floor Space (Width×Depth): 132.7 x 234.5″
Mass Of Machine: 41,800 Pounds

Equipped With:
– Mori Seiki CPP (Pallet Pool)
– TSC
– Chip Conveyor

Includes Tombstones and assorted tool holders.