Proto Trak FHM7 Bed Mill, 2015
$39,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Table size – 76″ x 14″
T-slots (number x width x pitch) – 4 x 16mm x 63.5mm
Travel (X, Y, Z axis) – 60″ x 23″ x 20.5″
Quill diameter – 5.06″
Spindle taper – NMTB 40
Spindle speed range RPM – 200-5000
Spindle center to column face – 23″
Spindle motor power – 7.5 HP
Power requirement, control – 110V, 1P, 15A
Power requirement, machine – 220V, 3P, 60HZ
Current, Full Load Amps – 37.5 FLA
Maximum weight of workpiece – 2200 lbs.
Height of table from bottom of bed – 38.25″
Maximum spindle nose to table – 21.5″
Minimum height – 95.5″
Maximum height – 101″
Width of machine including table – 110.5″
Length with electric box door closed – 93.75″
Overall width including full table travel – 171.65″
Overall length with electrical door open – 119.5″
Footprint – 37″ x 62.2″
Way surface – dovetail X axis; square ways Y and Z axis
Weight (approximate) net – 7650 lbs.
Weight (approximate) shipping – 7975 lbs.
Drilling max capacity – 1″ dia.
Tapping max capacity – 5/8″
Milling max capacity – 7 inch3/min
Way surfaces hardened and ground
Turcite coating on all slide ways
Automatic lubrication pump
Auxiliary function hardware
Limit switches
TRAKing/Electric Handwheels