fbpx

312-761-9396 | Se Habla Espanol

ZC
11194405913

Tormach PCNC 1100 Series 3 VMC, 2016 – Available Immediately

$12,900.00

This product is no longer available. For additional information, please fill out the form below.

Table Size: 34″ x 9.5″
Table Slots: 3 Slots 5/8″
Travel: 18″ x 9.5″ x 16.25″ (X,Y,Z)
Spindle Nose to Table: 17″ maximum
Spindle Center to Column: 11″
Spindle Nose Diameter: 3 3/8″
Shipping Dimensions: 56″ x 45″ x 60″
Weight: 1130 lbs. net / 1296 lbs. Gross (Excludes Stand)
Max Workpiece : 500 lbs. Maximum
Power Requirements: 230-250 VAC 50/60 Hz single phase (primary). 20A breaker recommended. 115 VAC 50/60Hz (secondary).
Frame and Table: Cast Iron Frame and Table, with Hand Scraped Hydrodynamic Ways and Tapered Adjustment Gibs
Way Surfaces: Low friction PTFE-Filled Acetyl Bonded Sliding Surface. Similar to Rulon® and Turcite
Spindle Taper: R8 (optional BT30 Retrofit Available)
Spindle Construction: Cartridge with Spindle Lock
Spindle Drive: Emerson Control Techniques™ Sensorless Vector Technology with Fold-Back Logic – 1100W Continuous, 2800W Peak.
Spindle Power: 1.5 hp Brushless AC 3-Phase Induction Motor, Vacuum Pressure Impregnated (VPI) Windings
Spindle Speed: 100 to 5140 RPM
Transmission: V-Belt Drive, 2 Ratios
Feed Rate: 110 IPM (X,Y) 90 IPM (Z)