Walter Helicheck Pro CNC Measuring Machine, 2019 – Cutting Edge Radius Sensor, Super Low Hours/Usage, Under Power

X Axis Traversing range:10.63”
X Axis: Max. traversing velocity: 3.94” /sec
Y Axis Traversing range: 13.98”
Y Axis Max. traversing velocity: 2.36”/sec
Z Axis Traversing range: 9.84”
Z Axis Max. traversing velocity: 3.94” /sec
A Axis:
Traversing range: 360°
Speed: max. 60 rpm

Total resolution of the measuring system resolution: 0.250 µm
Total resolution of the linear axes resolution:0.020 µm
Rotary encoder for rotational axes resolution:0.250 sec. of arc

WORKPIECE DIMENSIONS*
Tool diameter: 7.87”
Tool length: max. : 12.99”
Tool length for measuring end face: 8.66″
Tool weight incl. clamping chuck: max 55 lbs
* Depending on the option/equipment variants restrictions may apply.

CCD matrix camera 1
(TL1 , magnification = 50x), 1:1 telecentric optics
Transmitted lighting, image size approx. 3.6 x 4.6 mm.

CCD matrix camera 2
(AL1 , magnification = 200x),
4:1 telecentric optics, special incident lighting with 4 individually
controllable LED lighting segments.
image size approx. 1,0 x 1,2 mm.

CCD matrix camera 3
(AL2 , magnification = 200x), 4:1 telecentric optics
Special incident lighting (4 individually controllable LED lighting
segments),image size approx. 1,0 x 1,2 mm.

Additional lighting: 3 LED lighting units,
laterally and mounted in the door of the housing,
for additional lighting of the tool, such as for measuring of
negative chamfers / K-land.

MEASURING RANGE
– Standard measuring range, transmitted light camera
(TL1) max. 5.91”
If the tool diameter is 0.12” or smaller, the measuring capability of the individual parameters as well as the measuring and repeatable accuracy should be checked in every case.

– Extended measuring range, transmitted light camera
(TL1) 5.91” to 7.87”

CONTROL
PC:
• PC industry wallmount housing with power supply
• memory 2 x 4 GB DDR4-RAM
• 1x hard disk SSD SATA 240GB (System)
• 1x hard disk SATA 500GB (data storage)
• Operating system WINDOWS© (english)
PC peripherals:
• Operator panel with TFT color monitor with touch screen 22 “inch
• Mouse and keyboard
• External USB port 3.0 available
• Network interface, Gigabit LAN, RJ45 available
Control:
EtherCAT real-time control with PLC and decentralized servo drives.
Decentralized servo controller with power output amplifier for each axis.
Modifications to hardware due to technical improvements
subject to changes without notice.
If the machine is integrated into a network, it is the responsibility the
operator. The protection against viruses, unauthorized external access etc. is
to be guaranteed by the operator.

Operating voltage: 100 – 240 V/50 Hz and 60 Hz
Connected load: 230 V/50 HZ 2 kVA max

Dimensions and weight
Machine with integrated electronic cabinet:
Width: 57 ”
Depth: 75 ”
Height: 81 ”
Weight approx: 5511 lbs

Equipped With:

Cutting Edge Radius Sensor
Special toplight illumination unit for Helicheck Pro
1-1/4″ Hydraulic collet chuck, manually activated
Color Laser Printe
Software Quick Check grinding wheels
ViaScan
DXF-Generator