Haas VF-2YT VMC, 2020 – 10k RPM, TSC, WIPS, Under Warranty

Travels
X Axis: 30.0 in
Y Axis: 20.0 in
Z Axis: 20.0 in
Spindle Nose to Table (~ max): 24.0 in
Spindle Nose to Table (~ min): 4.0 in

Spindle
Max Rating: 30.0 hp
Max Speed: 10,000 rpm
Max Torque: 90.0 ft-lbf @ 2000 rpm
Max Torque w/opt Gearbox: 250 ft-lbf @ 450 rpm
Drive System: Inline Direct-Drive
Taper: CT or BT 40
Bearing Lubrication: Air / Oil Injection
Cooling: Liquid Cooled

Table
Length: 36.0 in
Width: 18.0 in
T-Slot Width: 0.626 in to 0.630 in
T-Slot Center Distance: 4.92 in
Number of Std T-Slots: 3
Max Weight on Table (evenly distributed): 3000 lb

Feedrates
Max Cutting: 650 ipm
Rapids on X: 1000 ipm
Rapids on Y: 1000 ipm
Rapids on Z: 1000 ipm
AXIS MOTORS
Max Thrust X: 2550 lbf
Max Thrust Y: 2550 lbf
Max Thrust Z: 4200 lbf

Tool Changer
Type: Carousel
Capacity: 20
Max Tool Diameter (full): 3.5 in
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 4.2 s
Chip-to-Chip (avg): 4.5 s
GENERAL
Coolant Capacity : 55 gal

Air Requirements
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8 in
Coupler (Air): 3/8 in
Air Pressure Min: 80 psi

Dimensions
Domestic Pallet: 106 in x 101 in x 101 in
Export Pallet: 101 in x 92 in x 100 in
Weight: 7800 lb
Domestic Pallet w/50+1 SMTC: 106 in x 101 in x 110 in
Export Crate w/50+1 SMTC: 109 in x 102 in x 116 in
Weight w/50+1 SMTC: 8100 lb
ELECTRICAL SPECIFICATION
Spindle Speed: 8100 rpm
Drive System: Inline Direct-Drive
Spindle Power: 30.0 hp
Full Load Amps (3 Phase) – Low: 70 A
Input AC Voltage (3 Phase) – High*: 440 VAC
Full Load Amps (3 Phase) – High*: 35 A

Equipped With:
10,000 RPM Spindle
Through Spindle Coolant
Wireless Intuitive Probing System
Chip Auger
High Intensity Lighting, 24V
Programmable Coolant Nozzle
Chip Tray Filter Kit