Bystronic XPert 40/1030 CNC Press Brake, 2020
$130,000.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Press Brake INCLUDES TOOLING
Tonnage 44 Tons
Bending length 40.6 in
Standard stroke [S] 7.9 in
Open height [D] 20.3 in
Distance between side frames 41.7 in
Table Width 2.4 in
Max. back gauge range X-axis 19.7 in
X-axis travel 11.8 in
X-axis speed 3543 in/min
R-axis travel 3.9 in
R-axis speed 1181 in/min
Z-axis travel 37.6 in
Z-axis speed 4724 in/min
max. Y-approach speed 591 in/min
Max. Y-working speed 59 in/min
Y-position accuracy 0.00016 in
Oil capacity 26 gal
Main motor power 7.5 kW
Weight 8,818 lbs
Length, approx. [L] 60 in
Width, approx. [W] 62 in
Height, approx. [H] 96 in
Basic machines
1.1 Xpert 40/1030
1.2 ByVision Bending control with 22-inch Full HD display and touch technology
1.3 OPC Interface Bending
1.4 Material curve generator
1.5 Dynamic drive system (DDS) with Energy Saver
1.6 Automatic tool protection
1.7 Fast Bend G2 safety system with manual height adjustment
1.8 6-axis back gauge
1.9 Oil cooling unit
1.10 Ergo foot switch
1.11 Rear protection sliding door electrically controlled
1.12 User manual (on CD)
1.13 Ambient air temperature 7ยฐC up to 35ยฐC
1.14 Voltage: 400/480 V, 50/60 cycles, 3 Ph, CE/UL (other parameters available on request)
Basic machines
1.1. Xpert 40/1030 – 1 x
2. User ergonomics
2.1. Ergo LED illumination pack – 1 x
2.2. Ergo arm support – 1 x
2.3. Ergo tool and bend equipment cabinets/shelves on each side integrated into the machine housing – 1 x
2.4. Optical Bend Guiding System (with RF-A/XPT only) – 1 x
2.5. Ergo height and position adjustable panel on the right side – 1 x
3. Value packages
3.1. Productive clamping pack RF-A (Upper tool clamping type RF-A hydraulic and Table T12/90) – 1 x
4. Tools
4.1. Starter Upper Tooling, RFA, 65206.0005.0003, Acute Offset, P5, 30 degree, L=1000, H=175, Segmented FSC – 1 x
4.2. Starter Bottom Tooling, RFA, 64201.0024.0001, V Die, V24, 30 degree, L=1000, H=55, Segmented FSC – 1 x
4.3. Tooling Credit – 1 x
5. Backgauge finger
5.1. Kit 3rd backstop – Xpert 40 and 80 (N0002.0040.000) – 1 x
Technical data
Machine
Type: Xpert 40×1030
Open height:
mm: 515
Stroke:
mm: 200
Throat:
mm: 0
Tonnage:
kN: 400
Bending length:
mm: 1030
Width between side frames:
mm: 1060
Working height:
mm: 885
Lower beam width:
mm: 120
Crowning:
hydr.: without
Y-approach speed:
mm/s: 250
Y-working speed:
mm/s: 25
Y-return speed:
mm/s: 250
Main motor power:
kW: 7,5
Oil capacity, approx.:
litre: 100
Backgauge
Type: P14HA3-HA6
X-axis
X-axis travel:
mm: 300
Max. backgauge range X-axis:
mm: 500
X-axis accuracy:
mm: 0,02
X-axis speed:
mm/s: 1500
R-axis
R-axis travel:
mm: 100
R-axis accuracy:
mm: 0,1
R-axis speed:
mm/s: 500
Z1-, Z2-axis
Z-axis travel, approx.:
mm: 955
Z-axis accuracy:
mm: 0,1
Z-axis speed:
mm/s: 2000
X1-axis
X1-axis travel:
mm: 0
X1-axis accuracy:
mm: 0
X1-axis speed:
mm/s: 0
General dimensions
Length (L):
mm: 1520
Width (B):
mm: 2010
Height (H):
mm: 2415
Side frame under-floor:
mm: 0
Lower beam under-floor:
mm: 0
Weight, approx.:
t: 4
Upper Tools
P04RFA-175
Lengths
10
15
20
30
50
100
100 + 25mm Left Opening
100 + 25mm Right Opening
200
275
300
P05RFA-175
Lengths
10
15
20
30
50
100
100 + 25mm Left Opening
100 + 25mm Right Opening
200
275
300
Bottom Tools
V08S-30
Height 55mm
Lengths
10
15
20
30
50
100
200
275
300
V10S-30
Height 55mm
Lengths
10
15
20
30
50
100
200
275
300
V12S-30
Height 55mm
Lengths
10
15