Mori NH-6300 DCGII CNC HMC, 2013 โ TSC, Pallet Pool, Chip Conveyor, 330 Tool Magazine, Probing
$249,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Axes And Travel
X-Axis Travel: 41.3โณ
Y-Axis Travel: 35.4โณ
Z-Axis Travel: 38.6โณ
Distance From Pallet Surface To Spindle Center: 3.9 โ 39.4โณ
Distance From Pallet Center To Spindle Gauge Plane: 3.9 โ 42.5โณ
Pallet
Distance From Floor Surface To Pallet Surface: 49.2โณ
Pallet Working Surface: 24.8 x 24.8โณ
Pallet Loading Capacity: 3,300 Pounds
Max. Workpiece Swing Diameter: 41.3โณ
Max. Workpiece Height: 51.1โณ
Pallet Surface Configuration: 24 Holes, M16 Tap, Pitch 5โณ
Minimum Pallet Indexing Angle: 1ยฐ
Pallet Indexing Time (Including Clamping And Unclamping): 2.0 Seconds (90ยฐ), 2.5 Seconds (180ยฐ)
Pallet Pool โ CPP
Number of Pallets: 11 (modular, can add more)
Speed (with/without pallet) 131.2/82.0 ipm
Workpiece Setup Specifications: 45 Degree Turn Table System
Spindle
Max. Spindle Speed: 10,000 RPM
Number Of Spindle Speed Ranges: 1
Type Of Spindle Taper Hole: CAT50
Spindle Bearing Inner Diameter: 3.9โณ
Feedrate
Rapid Traverse Rate: X, Z: 1,968.5 Ipm, Y: 1,968.5 Ipm
Cutting Feedrate: X, Y, Z: 0.04 โ 1,968.5 Ipm (Look-Ahead Control)
Max. Rotational Speed: B: 38.5 RPM
Jog Feedrate: 0 โ 197.0 Ipm (20 Steps)
ATC
Type Of Tool Shank: CAT50
Type Of Retention Knob: DMG MORI 90ยฐ Type, 45ยฐ (MAS-I), 60ยฐ (MAS-II), HSK-A100, DIN
Tool Storage Capacity (Including One Tool At The Spindle Side): Chain-Type: 330
Max. Tool Diameter (With Adjacent Tools): 4.3โณ
Max. Tool Diameter (Without Adjacent Tools): 12.5โณ
Max. Tool Length: 24.8โณ
Max. Tool Mass: 66 Pounds
Max. Tool Mass Moment (From Spindle Gauge Line): 21.6 Ft-Lbf
Method Of Tool Selection: Fixed Address, Shorter Route Access
Tool Changing Time: Tool-To-Tool: 1.7 Seconds, Cut-To-Cut (Chip-To-Chip): MAS: 4.4 Seconds, ISO 10791-9/JIS B6336-9: 16.6/4.5 Seconds (max./min.)
Motor
Spindle Drive Motor: 10,000
Feed Motor: X/Y/Z Axes: 6ร2/7.5/7.5ร2 HP, B Axis: 4 HP
Coolant Pump Motor: 1.5 HP (Spindle), 1.5 HP (Chip Removal), 3 HP (Shower Coolant)
Power Source
Electrical Power Supply: 66.0 kVA
Compressed Air Supply: 72.5 Psi, 158.4 Gpm
Tank Capacity: Coolant Tank Capacity: 245.5 Gallons
Machine Size (without CPP)
Machine Height (From Floor): 134.4โณ
Floor Space (WidthรDepth): 132.7 x 234.5โณ
Mass Of Machine: 41,800 Pounds
Equipped With:
โ Mori Seiki CPP (Pallet Pool)
โ TSC
โ Chip Conveyor
Includes Tombstones and assorted tool holders.